no video

[tweakmm]

This morning I turned my computer on, and when I did, my monitor refused to get out of power save mode. Its like no signal is being sent to the monitor, but it still says that it is plugged in.
I was OCing my AXIA Tbird last night. it is a stock 1000 and it is running at 1.33 w/ a 140 FBS and a 9.5 multiplier. But it ran 45 minutes of Prime95 and then it went through 3DMark 2001 without a problem.
It seemed to run fine, my temps were ok (53 full load) and I restarted it several times,
my question is, what could be causing this.
I was thinking that it could be a power supply issue, so i unplugged my 2nd HD and my CD-RW, still no Dice.

I am running an IWill KK266
AXIA Tbird
2x 128 MB Mosel Vitalic Ram
Geforce 2 MX(ASUS)
SB live Platinum
linksys NIC (forgot model number)
Premier 300 Watt
I have tried taking out the linksys, I have taken out the Geforce 2 and then put it back in. I have tried puting in a PCI video card with the geforce(will try putting it back in, without the geforce, after I get back from work).
Does anybody have any idea.
When I turn it on, all the fans start spinning, there is a beep, and the green light is on, its just there is no video.
Help would be apreciated.
Thanks,
Mike

 

[Konboy]

try a different video card..sound like your video card is bad. Overclocking can damage your video card and other stuff..that is why I dont overclock..

 

[Helznicht]

140 fsb is a pretty mild OC. The chance of it damaging your vid (specially a GF) is pretty slim. Plus he did try a dif vid card konboy.

I have had 2 monitors die like that over the years, never come out of powersafe mode. Try another monitor or try your mon on a dif system.

GO FOR THAT 19" or 21" YOU HAVE BEEN WANTING!

 

[tweakmm]

Thanks for the responses, and I'll try them all when i get home and then let you know how it went.
I've also had recomendations to reset my cmos.

 

[Konboy]

He said he tried a different video card WITH the geforce...Why dont you read!!! I told him to try a different video card without the geforce.

 

[Helznicht]

"try a different video card.."

and

"try a different video card without the geforce"


Hmm, sounds different to me, and I just assumed since he said he was going to do that, you wouldnt suggest it to him again. Sorry if I offended you......

 

[Konboy]

Well, dont use my name in a negative manner when you have no clue what I said when I PM him. Keep your comments about me to yourself and dont write about me on your thread.

 

[Renob]

konboy You need to chill out there cowboy.
Tweakmm Im sure when you clear your cmos it will come back up the KK266 boards do that when they dont like a OC..

 

[tweakmm]

I tried a differnt video card (some PCI card) and it didnt work. I'm gonna reset my CMOS soon. I'll let all of you know how it went after I'm done(hopefullyl from that comp)
thanks for all of your help,
Mike

 

[tweakmm]

I reset the CMOS and everything works great! Thanks for all of your help!
Thanks,
Mike