- Dec 14, 2003
- 29
- 0
- 0
|MB Asus P4P800 | CPU P4/2.4C GHz 533M 478PIN/512K | CORSAIR DDRAM 512MB 64MX64PC 3200LLPT | WESTERN DIGITAL 120GB 72,000RPM 8MB CACHE WD1200JB | PLEXTOR CDRW 48X24X48 PX-W4824TA/SW | Asus 9600XT | CHIEFTECH BLUE TOWER | CREATIVE INSPIRE 2.1 2500 3PC | VIEWSONIC 19" CRT P90F | BLACKSILVER | ANTEC TRUE430|
^^^Thats my system specs!
The problem is that even though I have everything aligned and hooked up, I dont get a post or display or anything on my monitor. I removed the battery, reset CMOs, replaced battery, and then powered up but still no post. What was weird was that when I took out the jumper from the CMOs pins I powerd up the machine and it posted then went to bios, so I saved the bios, said yes to the configurations, then it kept restarting because its a new MB and my hard drive still has configurations from the last Soyo MB that I burnt up. So then I power off the machine and repower on the machine, insert Windows XP CD, but then I don't get a post anymore! Tried taking it out the MB from the case and setting it on a non-conductive surface like a phone-book, and kitchen table, then powering it up, still no post! Resetted the CMOs I don't even remember how many times already. I know all my components works because I've tried them all on a different machine. The CPU, the hard drive, the memory, and the graphics card have all been tested and they work for sure! What is weird though, is that the graphics card's fan spins up for about 10 seconds, then it stops spinning. Would that mean my graphics card is dead? Because it worked on a different machine, not sure why it would not work on this MB. If you guys need anymore information or have questions, please reply back because I've already waited 1 week for this MB to arrive and don't want to wait any longer. Thank you all!!!!!
^^^Thats my system specs!
The problem is that even though I have everything aligned and hooked up, I dont get a post or display or anything on my monitor. I removed the battery, reset CMOs, replaced battery, and then powered up but still no post. What was weird was that when I took out the jumper from the CMOs pins I powerd up the machine and it posted then went to bios, so I saved the bios, said yes to the configurations, then it kept restarting because its a new MB and my hard drive still has configurations from the last Soyo MB that I burnt up. So then I power off the machine and repower on the machine, insert Windows XP CD, but then I don't get a post anymore! Tried taking it out the MB from the case and setting it on a non-conductive surface like a phone-book, and kitchen table, then powering it up, still no post! Resetted the CMOs I don't even remember how many times already. I know all my components works because I've tried them all on a different machine. The CPU, the hard drive, the memory, and the graphics card have all been tested and they work for sure! What is weird though, is that the graphics card's fan spins up for about 10 seconds, then it stops spinning. Would that mean my graphics card is dead? Because it worked on a different machine, not sure why it would not work on this MB. If you guys need anymore information or have questions, please reply back because I've already waited 1 week for this MB to arrive and don't want to wait any longer. Thank you all!!!!!
