Nissan Versa computer codes...

silicon

Senior member
Nov 27, 2004
886
1
81
The other day and it was very cold, -25C, my versa would nor restart after a stop at the ATM. It turns out there is trouble with the throttle actuator and 2 codes were set, P2101 and P2100. After waiting for an hour or 2 the car started but was showing 'service engine soon" on the dash. What I never knew is there is no mechanical link to the throttle..its by wire! A friend cleared the code with his scanner and so far the problem has not come back. What should I do? :(
 

Yuriman

Diamond Member
Jun 25, 2004
5,530
141
106
Probably nothing? Extreme cold does weird things to vehicles.

Last Monday it was around -30c here, and when I depressed the clutch in my car to drop in reverse and head to work, it felt like I was pushing the pedal through jello. Ditto with the gear shifter (5MT), and I know Honda uses thin fluids in their hybrids. Much colder, and I might not have been able to put it into gear, despite it being a stupidly simple mechanical linkage.
 

LTC8K6

Lifer
Mar 10, 2004
28,520
1,575
126
It could have been low battery voltage causing the codes? P2100 is low voltage to the throttle control motor.

BTW, throttle cables disappeared a long time ago, for the most part.