Nforce 680I SLI mb, yellow led?

[CHARLIEBORG]

My sons computer died this past week. I replaced a bad power supply, but now when I try to boot it up I see a yellow LED just to the left of the blue one? Has CR12J2 stamped next too LED. No numbers on the post board display though? Tried unhooking all the drives, usb, and other stuff, plus took the ram out. Still got it? Any one know what the LED is for?

I have a picture of the led and its location it that will help. Just cant attach it to message.

 

[hennessy1]

Have you tried removing the cmos battery for a bit? I believe that code and light has to do with a power supply as well.

 

[Iron Woode]

sometimes when a PSU craps out it takes the MB with it.

I hope that isn't the problem but you must keep that in mind.

PS: you need to save the image to an image hosting site and then post it here using the img tags.

 

[dawp]

it would also help to list exactly what board you have. a number of vendors made 680 boards and not all had leds on them.

 

[CHARLIEBORG]

it would also help to list exactly what board you have. a number of vendors made 680 boards and not all had leds on them.

122-ck-nf68-a1

 

[CHARLIEBORG]

http://i13.photobucket.com/albums/a261/Charlieborg/parts/IMAG0095.jpg

Picture of LED.

 

[Iron Woode]

according to the manual, you have an LCD post code display. What does it display when you boot up?

 

[CHARLIEBORG]

according to the manual, you have an LCD post code display. What does it display when you boot up?

It does not even get that far. I'm thinking the MB is toast.

 

[john3850]

net search cr12j2 led many evga hits

Go to egva forms search under 680i

cr12j2 and or any leds are not listed in there 680 manual ,

 

[Iron Woode]

It does not even get that far. I'm thinking the MB is toast.

unfortunately, I agree.

 

[fjbredtjr]

i have a very similar issue on the same board. :[
wondering if you ever figured anything out?

 

[CHARLIEBORG]

I just replaced the board. I never did get it going. Sorry