New system specs!

[chadomaly]

New system, fired up yesterday:

Lian-Li PC-6077
Enermax EG651P-VE(FMA) 550w PSU
Abit IC7
P4 2.6c (Phillipines)
1gb Geil PC4000 (500mhz) matched pair
Visiontek GeForce3 ti200 (carried over from old system)
Seagate 7200.7 Serial ATA boot drive
Maxtor storage HDD (from old system)
Plextor 24/10/40A CDRW (from old system)

I'm not the best photographer, but here's that new lian li case with the stuff in it:

http://crleap.home.insightbb.com/case1.jpg
http://crleap.home.insightbb.com/case2.jpg
http://crleap.home.insightbb.com/case3.jpg
http://crleap.home.insightbb.com/open1.jpg
http://crleap.home.insightbb.com/open2.jpg

mmmmmm

 

[Regs]

http://crleap.home.insightbb.com/case1.jpg
http://crleap.home.insightbb.com/case2.jpg
http://crleap.home.insightbb.com/case3.jpg
http://crleap.home.insightbb.com/open1.jpg
http://crleap.home.insightbb.com/open2.jpg

Lazy poop!

Nice stuff, just need to work on your video card for this Chirstmas!

 

[chadomaly]

Updated!

Updated system specs:

Lian-Li PC-6077
Enermax EG651P-VE(FMA) 550w PSU
Abit IC7
P4 2.6c (Phillipines)
1gb Geil PC4000 (500mhz) matched pair
Visiontek GeForce3 ti200 w/crystal orb & gold ramsinks(carried over from old system)
80gb Seagate 7200.7 Serial ATA boot drive
Plextor 24/10/40A CDRW w/rounded gold cable (from old system)
Altec Lansing 4.1 AVS30 Speakers
Microsoft Natural Keyboard Pro
Logitech MX700 Cordless Mouse

Changes today:
- Added 21" ViewSonic G220fb monitor >:-}
- Added 160gb Seagate 7200.7 Serial ATA storage drive (replacing old 40gb storage)
- Replaced stock case fans with following:
. Panaflo 80mm H1A on HDD rack
. Panaflo 80mm L1A on top exhaust
. 2x Evercool aluminum 80mm fans in rear exhaust (gold grills)
- Dremeled out the built-in fan punches for the rear exhausts
- Replaced stock thumbscrews with gold thumbscrews
- Replaced panel with Lian-Li window panel
- Added 2x pcmods red CCFL lights
- Cleaned up wiring significantly
More to come.

Problems: If any of you hope to put those aluminum frame fans into a Lian Li in dual fan as is possible on this case, they DO NOT FIT, as the frames are about 1/16" bigger than normal 80mm fans. I had to drill the fan mounting holes larger to mount the fans, then take the dremel to the back of the case to enlarge the mobo tray opening about 1/4 inch. Scary stuff taking a dremel to a case that's so new it's hard to get ahold of...

Pics:



New pic 1
New Pic 2
new pic 3
new pic 4
new pic 5
new pic 6

 

[madthumbs]

Ok, we officially all hate you now for rubbing it in our faces that you're new pc is better than ours! Happy?

 

[fredtam]

Kind of messy on the wiring, eh?

 

[xSkyDrAx]

Nice rig! The orange lights seem bright to me, but still nice!

 

[chadomaly]

No, the wiring is not messy at all. The only visible wires are 2 SATA cables, the IDE rounded cable, and the CCFL inverter cable at the bottom. Most of the power cables and such are run behind teh mobo tray (that PSU is hell to work with in a mid tower, cables are about 1m long)_

 

[fredtam]

Guess it must be the pic. Its nice though.

 

[vaporize]

what kind of crappy digital camera do you have?

 

[Sid59]

how freaking loud is it?

 

[chadomaly]

It's not too loud at all, I don't know any decibel rating, but I only notice a slight increase in noise over the 3 stock fans. And yeah I know the camera's crappy, but after I spent all this cash on this system, do you really think I can afford a new camera too?

 

[lchyi]

Are you using flash? No flash = slow shutter times.

 

[chadomaly]

No flash came on, it's set to auto. It's just a cheapo logitech funflash 640 I've had for a while now, not really a quality picture taker. But I dont use it often enough to justify an upgrade.