NEW RST driver released 11.7.0.1013 by intel

[hclarkjr]

http://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng&changeLang=true&DwnldID=22194
http://downloadmirror.intel.com/22194/eng/iata_enu.exe
http://downloadmirror.intel.com/22194/a08/iata_cd.exe


[FONT=&quot]Resolved Issues[/FONT]
[FONT=&quot]Resolved Issues in 11.7.0.1013 PC[/FONT]

[FONT=&quot]Reference No [/FONT]
[FONT=&quot]Description[/FONT]
[FONT=&quot]Affected OS's[/FONT]
[FONT=&quot]4161007[/FONT]
[FONT=&quot]SRT Incorrectly trying to stage frames past end of volume[/FONT]
[FONT=&quot]Win7,Win7-64,Windows 8,Windows 8 - 64[/FONT]
[FONT=&quot]4160794[/FONT]
[FONT=&quot]IAStoraIcon.exe error pos up and stress tool stops testing during Video Stress + AC/DC Cycling test.[/FONT]
[FONT=&quot]Windows 8 - 64[/FONT]
[FONT=&quot]4160744[/FONT]
[FONT=&quot]11.6 driver .inf needs FeatureScore to ensure the driver outweighs the 11.2 driver in Windows installation[/FONT]
[FONT=&quot]Windows 8[/FONT]
[FONT=&quot]4160749[/FONT]
[FONT=&quot]Accelerating OS after cache disassociation from missing passthrough disk induces BSOD F4[/FONT]
[FONT=&quot]Win7-64[/FONT]
[FONT=&quot]4160698[/FONT]
[FONT=&quot]failure to format BD-R (Blu-ray) disk[/FONT]
[FONT=&quot]Windows 8 - 64[/FONT]
[FONT=&quot]4160474[/FONT]
[FONT=&quot]Some ODD under ZPODD state does not eject by pressing tray button after resuming from hibernation.[/FONT]
[FONT=&quot]Windows 8 - 64[/FONT]
[FONT=&quot]4160677[/FONT]
[FONT=&quot]0x9F bluescreen when run S3 to S4 Timeout Focus+AP/LAN+ACDC.[/FONT]
[FONT=&quot]Windows 8 - 64[/FONT]
[FONT=&quot]4160820[/FONT]
[FONT=&quot] SRT causing extra cache misses on partial writes - extra spinups in AOAC[/FONT]
[FONT=&quot]Win7,Win7-64,Windows 8,Windows 8 - 64[/FONT]
[FONT=&quot]4160929[/FONT]
[FONT=&quot]UI disallows preservation of system disk during CVFD migrations of ANY RAID volume on Desktop systems[/FONT]
[FONT=&quot]Windows 8 - 64[/FONT]
[FONT=&quot]4160723[/FONT]
[FONT=&quot]UI allows acceleration with a custom cache even when the custom field is grayed out[/FONT]
[FONT=&quot]Windows 8 - 64[/FONT]
[FONT=&quot]4160617[/FONT]
[FONT=&quot]CLI returns success after failing to delete metadata with SRT enabled[/FONT]
[FONT=&quot]WinPE 3.0[/FONT]
[FONT=&quot]4160481[/FONT]
[FONT=&quot]Some instructions in RST GUI help are incorrect as the steps are for Win7 not for Win8.[/FONT]
[FONT=&quot]Windows 8 - 64,Windows 8[/FONT]
[FONT=&quot]4160480[/FONT]
[FONT=&quot]Topic is unexpected to be changed to another topic in RST help[/FONT]
[FONT=&quot]Windows 8,Windows 8 – 64[/FONT]
[FONT=&quot]4160079[/FONT]
[FONT=&quot]F4 BSOD during S3 and during checking disk spin status intermittently[/FONT]
[FONT=&quot]Windows 7 – 64[/FONT]

 

[Engineer]

Edit: Nevermind. It was my fault. Installed it on my AHCI system without RAID enabled. Getting old, lol!

Is is just me or did Intel remove the ability to view the OROM version by using the Help and System Report option? If that's the case, seems to be a shot at trying to keep TRIM from becoming active on anything other than the 7 series chipsets.

 

[Brahmzy]

Thanks OP. So, I installed it and I'm still able to see my OROM. Haven't tested to see if TRIM broke or anything.

 

[Puffnstuff]

Thanks for the heads up.

 

[vailr]

Edit: Nevermind. It was my fault. Installed it on my AHCI system without RAID enabled. Getting old, lol!

Is is just me or did Intel remove the ability to view the OROM version by using the Help and System Report option? If that's the case, seems to be a shot at trying to keep TRIM from becoming active on anything other than the 7 series chipsets.

The OROM version is visible under Intel RST only when RAID mode is configured in the motherboard bios.

 

[Engineer]

The OROM version is visible under Intel RST only when RAID mode is configured in the motherboard bios.

Hence my Edit!

 

[Purpose]

iastorui is crashing for me when I run this driver... back to 11.2...

 

[Puffnstuff]

I had problems with it too and rolled back myself.

 

[gpse]

Windows 8 Pro
Intel DZ77BH-55K Mobo
Core i7 2600k (stock)
8GB DDR3 1600Mhz

I've had this version installed for a week now, zero issues to report.
I'm using Intel SRT Caching (64GB Crucial M4 accelerating a 1 TB Caviar Black)
11.6.0.1702 OROM set to RAID in Bios.

 

[tweakboy]

Do I need this too. My M4 used to be 260mbps sata 2 board, noww with sata 3 board Im getting 380mbps then I checked again and its 300mbps..
anyhow,, will Intel RST fix this ??? Ive done the trim that comes with Win OS ,, thx in advance.

I got WEI score of 7.9 shouldnt it transfer @ 400mbps or more..... I checked its on a sata 3 port,,,,,,, ... Is this a driver issue ? What should I do ?