New Rig Q about Hooking up Case connnectors to MoBo

[Caveman]

Lian Li 1100B case... There is a USB wiring harness provided w/ the front panel USB connections. I want to plug this into my MoBo... It looks like there is one USB connector and then a bunch of smaller ones that are broken down into their individual components: Vcc2,USB2-, USB2+,Ground, etc... Do I only need to plug in the main USB connector into the yellolw receptacle of the MoBo? What are all these other small connectors on the harness for?

 

[Zepper]

OT - belongs in Cases & Cooling section...

If the connections aren't adequately covered in the instructions that came with the case, then you can pbobably find it at the LianLi web site. Your word picture doesn't quite cause my mind to create an adequate image of what you have.,,
.b.h.

:moon:

 

[Caveman]

bUMP...

 

[Thegonagle]

Like, there's a 10 pin plug, and spliced onto that there's a bunch of little one pin connectors?

The one pin connectors are for non-standard motherboard headers. If the main plug works, you can safely ignore the one pin connectors. Otherwise, look at your motherboard manual for the correct pinouts and hook up the one pin connectors to the proper pins individually, ignoring the 10 pin connector.

 

[Caveman]

Thanks Thegonogle. That makes sense... Now... if only I can find out if I can plug my cases front panel audio connector in my Audigy 2Zs... I'd like to be able to process sound through the mic and headphone jacks provided on the front of the case.