New Motherboard doesn't boot up

vitorsou

Junior Member
Feb 27, 2009
3
0
0
Hi guys, hope someone can help with this...thanks in advance!

  1. Overview of the problem
    New Motherboard doesn't boot up

  2. Full description of the problem and symptoms

    The mobo doesn't boot at all, no beep, giving black screen

  3. Did it work normally at one time, or has the problem always existed?
    always existed

  4. Is the problem consistent and repeatable, or entirely random, or semi-random?
    consistent

  5. I already tried these steps:
    I did the test with minium hardware i.e. 1 RAM, no cd-rom, no HDD

    -I have tried removing the RAM and the mobo does give me the 3 beeps warning code
    -From ASUS webpage it suggests that the mobo might need an updated BIOS to run E7400, however even when I tested with a working E6300 it still doesn't work
    -start without a cpu gives me no beep (with & without RAM, I guess thats normal?)
    -Have also tried reseting the CMOS and putting the mobo on a cardboard instead of case

    Wondering if my mobo is broken...
    My PSU is about 3yrs old but working fine on my old pc. not sure if thats the reason either.
  6. My software:
  7. My hardware
    System brand & model, if it?s a pre-built system such as a Dell, HP, Gateway, etc. If it?s not, fill in as much of the information below as you can.

    CPU: Intel E7400
    Mobo: ASUS P5KL/1600
    Ram: Corsair xms2 2G x 2
    graphics card: 6600GT (using this old card in case there isn't enough power...)
    PSU: Antec Neo HE 430

  8. Other information that might be relevant

[/quote]

 

KGB

Diamond Member
May 11, 2000
3,042
0
0
Welcome to the Forums! :beer:

Is your MB model actually the P5KPL-1600?

If so, check pages 1-18 thru 1-20 in your manual for the memory QVL. The 2GB Corsair modules do not appear to be supported.
 

vitorsou

Junior Member
Feb 27, 2009
3
0
0
Thanks :)

Yeah I saw they only have 1G on the list... but if the RAM isn't supported, shouldn't the mobo gives an error sound too? : /
 

KGB

Diamond Member
May 11, 2000
3,042
0
0
Not necessarily. Try a module from the QVL list and see if it lights up.

 

KGB

Diamond Member
May 11, 2000
3,042
0
0
Send it back for a refund and get something from the QVL.