New Lcd Worked Then Stopped Working, troubles with w1700

[JonathanJace]

I'm working on my second lumenlab diy projector and I stripped my new Dell w1700 lcd. Afterwards connected just the main controller board and monitor and powered on. It was working well for the most part, responding to the remote, solid green light, etc. I then turn the power to the monitor off, push button type, and connect the other main boards (1 sound, 1 component). All of a sudden when i power it on i get a solid yellow light. It goes green on power up and immediately to yellow. I also noticed that when i plug in the power cord the led flicks once green.

To troubleshoot to no avail i:
connected xbox vga
pc dvi
ps2 rgb
tv coax

the remote has fresh batteries and it worked before, but now with this problem it doesnt seem to be working.

Please Help
-Jonathan

 

[JonathanJace]

is this the right area to post about this

 

[dfuze]

I recently had an issue w/ my lcd too, where it would turn on green, but then the color would go to orange. Try this: turn entire system off. Unplug monitor from wall. Wait a minute, then plug it back in. Turn on monitor first, then turn on pc. See if that does it.