MSI p67a gd65
msi twin frozr II 570
2500k
corsair hx750
8Gb ripjaw ram
that's all I have plugged into it right now.
Just built my new sandy bridge system and when I tried to first power it on it came on for just a few seconds and then turned off. After that it just started looping on and off until I turned the psu off.
Edit: I seemed to have solved the chain rebooting issue because I had it resting on the anti-static bag but the issue with the bios not booting and going to that one error message continues to happen.
The problem seems to be intermittent because sometimes I'm able to boot into bios and other times it gives me some weird thing that says "efi shell version 2.00 [4.640]
Current running mode 1.1.2
map: cannot find required map name.
press esc in x seconds to skip startup.nsh, any other key to continue.
shell> _ "
this seems to happen ~every other restart and clearing cmos gets it to boot into bios again.
Getting 2 long and 1 short beep I believe.
msi twin frozr II 570
2500k
corsair hx750
8Gb ripjaw ram
that's all I have plugged into it right now.
Just built my new sandy bridge system and when I tried to first power it on it came on for just a few seconds and then turned off. After that it just started looping on and off until I turned the psu off.
Edit: I seemed to have solved the chain rebooting issue because I had it resting on the anti-static bag but the issue with the bios not booting and going to that one error message continues to happen.
The problem seems to be intermittent because sometimes I'm able to boot into bios and other times it gives me some weird thing that says "efi shell version 2.00 [4.640]
Current running mode 1.1.2
map: cannot find required map name.
press esc in x seconds to skip startup.nsh, any other key to continue.
shell> _ "
this seems to happen ~every other restart and clearing cmos gets it to boot into bios again.
Getting 2 long and 1 short beep I believe.
Last edited:
Facebook
Twitter