Just put together my new computer last night, and have already run into a pretty big problem. While copying a rather large file from the network to one of my hard drives I received a write error, and when the computer recovered it showed the drive as being empty (although it still reported the correct amount of used/free space). I rebooted the computer and now it doesn't show up in windows at all. It does, however, still show up in BIOS.
Here are the details on the computer:
3800 X2
EPoX 9NPA-Ultra
2x 512 OCZ Value 1T 2.5 4 4 8
FSP 450W PSU
Both my hard drives are Maxtor 120GB PATA. The drive in question is hooked up to the SATA via an adapter.
I am not using the NForce drivers for IDE, and as far as I know I'm using the generic Windows adapter for SATA as well. So far I've tried updating the BIOS, and double checked the power/data connections on the drive. I've also tried switching from SATA port 1 to port 3, but no dice there either. Anyone have any ideas?
Here are the details on the computer:
3800 X2
EPoX 9NPA-Ultra
2x 512 OCZ Value 1T 2.5 4 4 8
FSP 450W PSU
Both my hard drives are Maxtor 120GB PATA. The drive in question is hooked up to the SATA via an adapter.
I am not using the NForce drivers for IDE, and as far as I know I'm using the generic Windows adapter for SATA as well. So far I've tried updating the BIOS, and double checked the power/data connections on the drive. I've also tried switching from SATA port 1 to port 3, but no dice there either. Anyone have any ideas?
Facebook
Twitter