New Asus A7V Bios 1005 Final

[formulav8]

I haven't installed it yet so i don't know if the multiplyer adjustments in the bios works yet. Get it here

 

[Muerto]

Woohoo! Downloading now!

 

[Muerto]

Hmmm, well I don't see any multiplier adjustments at all. As far as I know you still have to use the dipswitches.





I'll keep looking though...

 

[Layzie310]

I'll definitely be switching back to 1004. I installed it, restarted, went into the bios, and when I got to the boot section, my computer completely froze and the screen was all scrambled around. I didn't see any dipswitch settings. Plus, I still had the problem with the "Boot Disk Failure" (I think that's what it said). It booted up once I pressed enter but I don't want to do that everytime I startup my machine.

 

[formulav8]

You have to set the motherboard to jumper-free mode to get the multiplyer settings in the bios.

 

[formulav8]

Well, i put in the new bios and the multiplyer adjustments in the bios now works. Its just buggy now. I went back to 1004D. I hope they fix the bugs.

 

[Isaiah]

Cool downloading now

 

[Isaiah]

well I am back up and runing
but I can not find the multiplyer adjustments where are they?
other then the mutiplyer adjustments it is working great

Isaiah

 

[Krish]

I put the mobo in jumper-free mode and still no multiplier adjustments showed up. Layzie, I also had that same problem at first...I found out that it was my CD-RW on my 2nd IDE channel that was causing it. I disabled secondary IDE and the bootmenu worked...not really a solution, but rather a workaround.


I'm currently running 1004c, but I'd like to go back to 1005 if I could get the multi. adj. working. All I have to do is change the jumper to jumper free and set all the dipswitches to off and it should work . right? Do I need to set all the voltage jumpers to 3-4 ?

 

[Krish]

Well, have jumper-free mode on, all dip switches turned off, and voltage jumpera set to jumper-free, and still no multiplier adjustments show up. Are they in the Advanced section?

 

[formulav8]

They should be where the fsb adjustments are. I went back to 1004D because my comp kept crashing.