Hello all. I am in the power up portion of my new system build and my existing RAID-0 configuration is not being recognized by the new system. It's really important that I maintain the data on the current RAID array because I can't replace some of the files. Is it possible to maintain a RAID-0 array from a previous system? I am going froma SI RAID controller from my old system to the Intel ICH7 controller in my new system. On the mobo, it has 4 connectors for the ICH7 controller (2 red, 2 black). I have tried various configurations (master/master, master/slave, etc) but have had no different luck. I can actually get to the RAID setup screen shortly after initial boot but if I change anything in this setup menu, won't it lose my previously saved data? Here are my components:
Intel P5 650, 3.4Ghz CPU
Asus P5WD2 Premium Mobo
Mushkin XP DDR2 6400, 800 mhz
Maxtor 200GB SATA1 HD's (x2)
Also, for some reason on boot-up, the computer is saying that I have PC2-4300 RAM.
Quick responses needed!! Thanks!!
John Beck
Intel P5 650, 3.4Ghz CPU
Asus P5WD2 Premium Mobo
Mushkin XP DDR2 6400, 800 mhz
Maxtor 200GB SATA1 HD's (x2)
Also, for some reason on boot-up, the computer is saying that I have PC2-4300 RAM.
Quick responses needed!! Thanks!!
John Beck
