Need to mod 2500+ bridges for 16x mult ?!?

[Soulkeeper]

I was checking out the ocinside interactive painting guide
and it shows the older setup where the L3 has 4 bridges

my 2500+ has 5 L3 bridges and don't have an L10 bridge like the older XP's

anyone know how I might do this ??

 

[Soulkeeper]

this sucks

i can mod the voltage bridges with success, but i matched All the bridges on my 1700+ to those of my old 2400+ and the motherboard still reads it as a 1700+ even after clearing the cmos
the board has support for the 2400+ and 2600+ so i figured this would work

bla the cpu even has the same package type and color

looks like 2000+ is the highest rating I can get on the motherboard with any cpu/bridge settings


what do you all think ?

 

[TRUMPHENT]

Drill free mod!

You should give this a try. It looks like a easy way to do the wire trick without the wires.:beer:

 

[KF]

Well since the bridges for 15x (for 2400+) don't resemble at all 11x (for 1700+), I think you must have screwed up bad.
This gets you to the 5 bit painting guide for Tbreds

 

[KF]

Originally posted by: TRUMPHENT
Drill free mod!

You should give this a try. It looks like a easy way to do the wire trick without the wires.:beer:

$15 at Plycon

Except this locks your CPU to the low multipltiers, and Soulkeeper wants the high multipliers. (13x and over)

This is the kind of confusion you get by calling this mod unlocking.

 

[TRUMPHENT]

We should all try to keep SoulKeeper away from the higher multipliers. He doesn't know when to stop.

 

[KF]

Originally posted by: TRUMPHENT
We should all try to keep SoulKeeper away from the higher multipliers. He doesn't know when to stop.

Definitely.

I don't know why he asks people's opinons about stuff like this. He never agrees.