Need signed drivers for Intel V300 SSD to install Win8

[JoeyJetson]

New on this board, looking for answers to an install problem. I have looked and cannot find any information on this problem.

I am trying to do an install on a new computer build with a new disk containing Windows 8. I entered product key, process starts, asks what drive to put the OS on and I choose the only drive an Intel 330 180GB SSD . It then asks to put in the disk that came with the drive and I did that, it then says that that disk and files on that disk are "not signed" drivers and will not let the install proceed. I went to the Intel download center and downloaded the Toolbox and the firmware for this SSD and put them on a disk and had same message, no signed driver found. It will not let me proceed. Any ideas?
Thanks

MSI Z77A-G41 Motherboard
32GB DDR3Ram (2x16) in slots 2 & 4
Intel 330 180GB SSD

 

[smakme7757]

Normally you are asked for drivers when the install wizard doesn't find any drives. At that point you would give it the chipset drivers. I have never heard of it asking for actual drive drivers before.

Anyhow you can try putting these on a USB stick and trying:
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23060&ProdId=2101&lang=eng&OSVersion=Windows%208*&DownloadType=Drivers

Download either
*f6flpy-x64.zip for 64bit Windows 8
*f6flpy-x86.zip for 32bit windows 8

Be sure to extract the files from the zip file and place the files on a USB (Not in a folder. Just directly on the usb stick).

Worth a try.

This also presumes you have an Intel AHCI controller, but it's worth a try.

 

[corkyg]

You might also take a look at the Intel firmware update for the 330 Series SSD.

https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18363