Need pin out description for Abit SA6 USB2 port

[zener]

I need the pin out description for Abit SA6 USB2 port. The manual does not provide this info. Are pin 3&4
corresponded to Vcc3 and Vcc4 or pin 9 & 10. Thanks,

 

[Viper96720]

It's in the manual
pin 1=usbpwr0 pin2=usbpwr1
pin3=usb_fp_p0- pin4=usb_fp_p1-
pin5=usb_fp_p0+ pin6=usb_fp_p1+
pin7=gnd pin8=gnd
pin9=key pin10=usb_fp_0C0

 

[zener]

Viper,
The USB2 header of my SA6 has pin 11, 1 and 2 removed as shown correctly on page 2-8 of the manual. So there is no way that pin 1 and 2 can be usbpwr0 and usbpower1. Are you mistakenly quoted the pin out of USB1? Thanks,

 

[Viper96720]

Yes sorry that was for usb1. Found this page. Showing the different configs but no pin outs. I would think they would follow the usb1 pinouts.
SA6

 

[zener]

Viper, thanks! With your info for USB1, I can deduct that pin 2 and 3 are usbpwr2 and usbpwr4. I check it with a DMM and everything works fine when I hookup my case usb ports.

 

[zener]

I mean usb2 pin 3 and 4