need help with moderboard nforce4 a939.

[BObbis]

Hi, I have a little problem with my motherboard nForce4 A939. the problem is that the cable from the start button to the motherboard is loose and I can not find the right place to put it on so I cant start my computer. I've lost the manual and it says nothing on the motherboard how to sit and I cant find anything on the internet either so therefore I ask you if you know anything!

sorry for my bad english I hope you understand anyway, Thanks in advance!

 

[cubeless]

Hi, I have a little problem with my motherboard nForce4 A939. the problem is that the cable from the start button to the motherboard is loose and I can not find the right place to put it on so I cant start my computer. I've lost the manual and it says nothing on the motherboard how to sit and I cant find anything on the internet either so therefore I ask you if you know anything!

sorry for my bad english I hope you understand anyway, Thanks in advance!

chances are the wires go onto pins that are right next to the other wires that go to the front panel...

generally it will look like this:

hhrr
ddoo

where hh are the two pins for the hd led; rr are the two pins for the reset button; dd are the two pins for the power led; oo are the two pins for the power button...

but you ought to be able to find the manual on the web...

you can test the pins by shorting the two pins (be sure never to touch more than 2 pins) with a screwdriver tip... if the pc starts, you have the right pins... if there's big flash and smoke, try some other pins (but i've never managed to get this effect without touching more than 2 pins that are right next to each other yet)...

 

[SolMiester]

read the motherboard model number to the side of the cpu and google for manual