need help ! P4B533-V motherboard

[tekkgod]

Socket 478, Pentium 4, CPU-P4-2.2 1 261.99 *Discrepancy & Shipping damage must
Intel 2.2GHz 512K 400MHz be reported within 7 days = OK
478-Pin Microprocessor,
(Northwood), Retail box
Asus P4B533-V Socket 478 MB-P4B533V 1 .00
motherboard, i845G, DDR,
USB 2.0, Audio, SPDIF,
Video, LAN
Chaintech NVIDIA GeForce4 VD-G4-Ti4600 1 .00
Ti4600, 128MB DDR AGP
Video Card with TV Out,
Retail Box
Sound Blaster Audigy SOU-Audigy-Gamer 1 .00 *Add Audio Cable = Yes,
Gamer, Creative Labs Single(+2.00)
Sound Cards / Adapters,
24bit, Part Number:
70SB009003002
DDR 1024MB 266MHz (PC DIM-1024-DDR 1 .00 *Discrepancy & Shipping damage must
2100) 184Pin Memory, ECC, be reported within 7 days = OK
Registered, OEM *Physical damage by user will void
your warranty = OK
*Test Before Shipping? = Yes(+4.00)
Black Antec Windows 98 KBD-Antec-b 1 .00 Add = PS2 M-F Extension
Keyboard, All the Power Cable(+4.00)
of Windows98, KF-898B,
Retail box
Logitech USB iFeel MOU-iFeel 1 .00
Optical Mouse, 3-button,
Retail box
IBM Deskstar 123.5GB HD-IBM-120 1 .99 *Add IDE Cable = Ribbon, 1,
7200RPM Ultra DMA EIDE ATA66/100(+1.99)
Hard Disk Drives, ATA100, *Add Mounting screws = Yes(+3.00)
OEM *Substitution OK? = No
Black Mitsumi 1.44MB 3.5" FD-D359M3D-MIT 1 .00 *Add Floppy Cable = Yes(+2.00)
Floppy Drive, internal, *Add Mounting Screws = Yes(+1.00)
D359M3D,OEM
Black TEAC 40X12X48X CDR-W540E-B 1 .99 *Add Add IDE Cable = Ribbon, 1,
Internal IDE CD-R & CD-RW ATA66/100(+1.99)
Drive, Model: CD-W540E,
OEM
Charcoal Black Pioneer DVD-P-115LG 1 .99 *Add Audio Cable = Yes(+2.00)
16x Tray DVD-Rom Drive, *Add IDE Cable = Ribbon, 1,
DVD-115LG/ DVD-116LJ, OEM ATA66/100(+1.99)
*Add Mounting Screws = Yes(+3.00)
Charcoal Black DELL MTR-32DVX 1 .00
1403FP 15''(15'' VIS)
1024 x 768 LCD Flat Panel
Monitor
Cyclone Blower, Antec FAN-A-Cyclone 1 .99 *Add 12-to-7V Power Adapter =
System Cooling Fan for Yes(+3.99)
Expansion Slot
Directron Koolance CS-601AE-KOOL-W 1 .95 *Add 12inch Cold Cathode Light Kit
PC2-601-W Large Tower = Yes, Blue 105B(+34.95)
Super Liquid Cooled Case, *Add 8cm Rear Fan = Two Quiet
w/Side Window, *P4 Ready* Panaflo w/4-pin(+34.00)
*Add Power Supply = Turbo-Cool
300W(+.00)
*Add 4 Thumb Screws = Yes(+4.00)
*Add Hard Drive Cooler Kit =
Yes(+.00)
*Add Motherboard Cooler Kit =
Yes(+.00)
*Add Power Cord = Yes(+1.00)
*Choose CPU Water Block =
CPU-200(+.00)


monitor says theres no video signal

what can i do?

 

[Boonesmi]

is the system powering up? meaning are the fans starting/harddrive spinning up?

some things to try
if the board has any jumper settings verify they are correct (im not familiar with that board)
clear the CMOS
reseat the memory
reseat the vid card
reseat the cpu

if the stuff above doesnt work

unplug everything from the board except the ram/vid card/cpu (take out all the pci cards, unplug the cable harddrives/cdroms/floppy drives, etc, etc)
and see if it will post with just the cpu/ram/vid card

good luck