• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Need help finding voltage for a P100 on a Biostar MB-8500TAC-A Ver. 6

Older pre MMX motherboards only offered 3.3v for the CPU voltage. There should be some silk screening on the board that specifies the jumpers for the FBS, choices were 50, 60 and 66MHz, another jumper block will specify the multiplier, options were usually 1.5 and 2.0. Just like modern motherboards, FBS x CPU ratio determines what speed the CPU will operate at, for a P100 that would be 2.0 and a 50MHz bus speed. If everything works fine at that speed, try overclocking it by using the 60MHz bus speed setting, that P100 will run at a blazing 120MHz.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top