• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

need help ASAP please

T

tizodq

Member
i just got my amd 2000+ and epox 8k3a+ in the mail today. i setup everything and the first boots were good. i noticed on the restarts that my clock is only 1250 mhz. so i went into bios and into the frequency/voltage control. i then changed the cpu clock from 100 to 133. i saved and since then when i try and boot i just get a blank screen and the error on the mobo is 25 ( which in the books it says reserved) i took out the bios battery for like 5 min nothing. clear the cmos jumper for about 10 seconds. did both at the same time. ALL CAME UP WITH NOTHING. so wtf happened and any suggestions on what to do??

thnx for your help
 
Just a guess, but reset your cmos, then reboot, change your bus to 133, but ALSO change your memory timings to CAS 2.5. See if that works. For Abit, 2 is the CAS default, and that is what I had to do. I don't know if that is your problem though, because I don't know Epox.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top