need advice on tweaking Asus CUSL2

[Infra]

i just happend to buy a my very new very polished and also very bran spanking new rig, muahahahah, my spec's are:

cpu = 800eb stock, 133mhz (pentium III)
mobo = asus cusl2 815
ram = 128mb spectec (133bus) <--- is this overclockable?
HD = Barracuda ATA II (30.6gb) 7200rpm
video = voodoo 3

any advice on how to make this baby scream some more

p.s. do i have to do something eles other then enabling the dma in winme to make sure its fully runing in dma100?, i also run win2k

 

[AndyHui]

Never heard of that RAM.

You should disable AC97 Sound and Modem in the BIOS. Make sure you have the latest BIOS, either 1003 Final or 1005 Beta 006.

You should also consider disabling the serial ports in the BIOS to free up extra IRQs if you do not use them.

Make sure that you install the Chipset inf Drivers.

Intel's ATA Storage drivers are optional. They may give you better performance, although they need to be installed twice to work correctly under WinME. You should avoid installing these under Win2K for the moment as they have issues, and also avoid installing them if you have an IDE CDRW.

Well, that's a start. Hope that helps.

 

[RedRooster]

Go to CUSL2.com, there's everything there you could possibly need.

 

[OJ]

Had a stick of Spectec, would run pc133 @ Cas3, no faster
I tried many different settings, this was on my Cusl2

 

[aceO07]

infra you have the same chip and mobo as i do. i have it running at 900mhz @150casc.. i'm using mushkin rev2 128mb though.