- May 6, 2004
- 6,285
- 1
- 0
The parts:
Biostar TA790 A3+
C2 965BE 3.8@1.44v/2.8@1.44v
2x2GB OCZ DDR3 Gold
Sapphire 4850 512MB 730/1168@ stock volts (might play with the voltage once accelero S1 arrives here)
Chaintech AV-710
Visiontek HD650 (PCI-e 1x I believe.. could live without it, oh well)
Toshiba SD-H802A HDDVD Drive
Hitachi HDT721010SLA360 (7K1000.B, 7200RPM 1TB)
Samsung HD501LJ (T166, 7200RPM 500GB)
WD1001FALS-00E8B0 (Caviar Black, 7200RPM 1TB)
2x GentleTyphoon 1x Slipstream (to replace the GPU fan)
may add another HDD in the future, 1TB-2TB range
Currently I have it paired up with a EW430, getting some occasional lockups which I am attributing to the PSU; didn't have this problem before upgrading the GPU to the 4850.
With the accelero S1 rev to I have recently purchased for the 4850, I doubt I would do CF on this. It is a secondary rig after all. But there is a slight chance I might sell the card and upgrade to a better single card, or even CF is possible if I happen to find another super cheap 4850
What do you think would be fitting 1)for now, including an additional HDD 2)another 4850 (just in case)?
Antec PSU calc tells me I would need 1)459W 2)543W at minimum (90% TDP for the CPU, 90% system load).
I am open to deals including rebates/BCB, been eyeing on recent antec deals, otherwise the TP new line. Modular would be nice, but not necessary if that means more than $10 difference in price. Are HX's better than TX's other than being modular? My main rig has a TX850 btw, not sure where it stands today's standards. Looks don't mean much to me, so I don't have anything against XFX either.
Oh, and I need to buy a new PSU anyway, so just sticking with the EW is not an option. My friend has just bought parts for a HTPC without a dedicated GPU, and could probably get by with something as 'lowly' as an EW430. I explained the whole situation to him and he agreed to take it off my hands for cheap, hence my pondering with the possible upgrade paths.
Biostar TA790 A3+
C2 965BE 3.8@1.44v/2.8@1.44v
2x2GB OCZ DDR3 Gold
Sapphire 4850 512MB 730/1168@ stock volts (might play with the voltage once accelero S1 arrives here)
Chaintech AV-710
Visiontek HD650 (PCI-e 1x I believe.. could live without it, oh well)
Toshiba SD-H802A HDDVD Drive
Hitachi HDT721010SLA360 (7K1000.B, 7200RPM 1TB)
Samsung HD501LJ (T166, 7200RPM 500GB)
WD1001FALS-00E8B0 (Caviar Black, 7200RPM 1TB)
2x GentleTyphoon 1x Slipstream (to replace the GPU fan)
may add another HDD in the future, 1TB-2TB range
Currently I have it paired up with a EW430, getting some occasional lockups which I am attributing to the PSU; didn't have this problem before upgrading the GPU to the 4850.
With the accelero S1 rev to I have recently purchased for the 4850, I doubt I would do CF on this. It is a secondary rig after all. But there is a slight chance I might sell the card and upgrade to a better single card, or even CF is possible if I happen to find another super cheap 4850
What do you think would be fitting 1)for now, including an additional HDD 2)another 4850 (just in case)?
Antec PSU calc tells me I would need 1)459W 2)543W at minimum (90% TDP for the CPU, 90% system load).
I am open to deals including rebates/BCB, been eyeing on recent antec deals, otherwise the TP new line. Modular would be nice, but not necessary if that means more than $10 difference in price. Are HX's better than TX's other than being modular? My main rig has a TX850 btw, not sure where it stands today's standards. Looks don't mean much to me, so I don't have anything against XFX either.
Oh, and I need to buy a new PSU anyway, so just sticking with the EW is not an option. My friend has just bought parts for a HTPC without a dedicated GPU, and could probably get by with something as 'lowly' as an EW430. I explained the whole situation to him and he agreed to take it off my hands for cheap, hence my pondering with the possible upgrade paths.
Last edited:
