NAT32X Help

[Ap4thy]

I have ADSL and i'm tyring to share the connection between another computer using a hub and NAT32X (i know a router would be better but i haven't had a chance to pick it up, and i haven't had any problems before using the hub). When i load up NAT32, i get this...:

NAT32X Version 1.5 (9. June, 2001) Build: 6022
(C) 2001 N.A.T. Software
Interface[1] [Dial-Up Adapter]
Interface[2] [3Com EtherLink III ISA (3C509b-TPO) in PnP mode]
Filter[1] 0.0.0.0
Filter[2] 0.0.0.0
ICMP Mapping[1] enabled
DNS Detection[1] enabled
Starting DHCPD[78]
DHCPD[78]: terminating, no Secondary Interface
IDENTD[76]
File 'connect' executing
IDENTD[71]
CONNECTED
HTTPD listening at 0.0.0.0:8080 (private)
%

I'm pretty sure the sutff in bold is the culprit, what can be the problem? I've used this before and haven't had any problems, now i get this? If someone could help me out, it would be greatly appreciated, thx

 

[Garion]

It only sees one NIC, and the app requires two. You need to have one card on the "outside", connecting your PC to the ADSL modem. The second would be on the "inside" connected to your hub.

- G