I just recently purchased a Tekram 390U3W SCSI card to throw in a second machine... I already have an identical card in my main machine. To test the card, I pulled the card out of my main machine and replaced it with the newly purchased card. The jumpers on the card were set the same, so I didn't expect to have any problems. When I set everything up and booted the computer, I did not see any indication the card was searching the ID's for a device, nor did the card detect my drive, just a screen showing the two LSI Controllers, then a screen with the message that NTLDR is missing, indicating that it doesn't see my drive (Maxtor 10K IV, the only device connected)... Any ideas on what I might be missing?
Never mind... I worked it out... Figured out the option to enter the menu to each controller, and set them back to default settings, and working now....
Dave
Never mind... I worked it out... Figured out the option to enter the menu to each controller, and set them back to default settings, and working now....
Dave
