HouRman's Case and Mods
I made the page in a jiffy to show some pics in response to a request.. I can add more pics or explain if u want.
Dynamat Extreme on all inside panels, Cut holes in dynamat where screws protrude.
Modded case fan holes by cutting stock grill and adding new ones, added 120mm intake Toyo fan by enlarging an 80mm hole
Wrapped wires with yellow electric tape in spiral pattern
Cables with yellow split loom and terminated ends with black electric tape
Painted case with 4 coats of glossy black laquer with 2 coats of clear coat for a mirror finish.
Added external Chrome knob to control a variable resistor (rheostat) to manually control Fan rpm.
Mounted full sized thermal take golden orb on Geforce which takes up 3 pci slots that I don't use
Mounted Heatsink on Clock Multiplier as seen Above the RAM slots
Painted Edges of fan tips white to produce a white Ring while they spin
I havn't painted the DVD rom or CDRW because they're still new and I think it voids the warranty if I paint them.
The Golden Orb is being held on by 4 zip ties in a square, and some thermal paste. Now that's what I call a riced graphics cooler
Other Info:
That magic card u see on the ground is a Defender of Chaos Proxy as a Barbarian Lunatic. hehe
That Controller is a $370 Futaba 3PJS PCM digital remote control for my RC cars, the Spoon Honda S2000 is seen in the reflection of my case panel. (HPI Pro3)
The Subwoofer is in the corner of the room for improved acoustics
Those headphones are my favorite Sennheisers
Comments, Questions?
I made the page in a jiffy to show some pics in response to a request.. I can add more pics or explain if u want.
Dynamat Extreme on all inside panels, Cut holes in dynamat where screws protrude.
Modded case fan holes by cutting stock grill and adding new ones, added 120mm intake Toyo fan by enlarging an 80mm hole
Wrapped wires with yellow electric tape in spiral pattern
Cables with yellow split loom and terminated ends with black electric tape
Painted case with 4 coats of glossy black laquer with 2 coats of clear coat for a mirror finish.
Added external Chrome knob to control a variable resistor (rheostat) to manually control Fan rpm.
Mounted full sized thermal take golden orb on Geforce which takes up 3 pci slots that I don't use
Mounted Heatsink on Clock Multiplier as seen Above the RAM slots
Painted Edges of fan tips white to produce a white Ring while they spin
I havn't painted the DVD rom or CDRW because they're still new and I think it voids the warranty if I paint them.
The Golden Orb is being held on by 4 zip ties in a square, and some thermal paste. Now that's what I call a riced graphics cooler
Other Info:
That magic card u see on the ground is a Defender of Chaos Proxy as a Barbarian Lunatic. hehe
That Controller is a $370 Futaba 3PJS PCM digital remote control for my RC cars, the Spoon Honda S2000 is seen in the reflection of my case panel. (HPI Pro3)
The Subwoofer is in the corner of the room for improved acoustics
Those headphones are my favorite Sennheisers
Comments, Questions?
Facebook
Twitter