My PC does not turn

[JP-AbarcaC]

Hello, I have a huge trouble. The thing is: I put all of my hardware on a carton box and I travel with it 3 hours, then when I get home I started with my building and when I finished to connect everything. My pc does not start. I change the PSU and nothing. I'm a little noob about this stuff. If somebody could help me I will be very grateful. :$

---

Thread moved to Computer Help, per MagnusTheBrewer's suggestion. 🙂

Harvey
Senior AT Mod/Admin

 

[MagnusTheBrewer]

Wrong forum. Ask to be moved to Computer Help. Do a minimal install of just MB and one stick of ram. No HDD and use IGP if you have it otherwise, use your GPU of course. Try to boot. Make sure your one stick of ram is in the correct slot for that configuration. Double check your case connectors.

 

[denis280]

are all you front wires connected in the right place.reset hdd power.????

 

[silicon]

are all you front wires connected in the right place.reset hdd power.????

This! Double check all connections to the MB.

 

[daveybrat]

And it would be very helpful if you could list the parts you are using.

 

[meeshu]

Some wires, cables, or components may have worked loose during transport.

Make sure memory, video card, extra card(s) are seated firmly within their respective slots.

Check that cables are connected firmly for -
Mains power cable to PSU
24 pin motherboard cable from PSU to motherboard
6 or 8 pin CPU power cable from PSU to motherboard
6/8 pin PCIe cable from PSU to video card (if required for that card)
Power cables from PSU to SSD's, HDD's, and optical drives
Data cables from motherboard to SSD's, HDD's, and optical drives
Power on cable from case (power switch) to motherboard