• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

My OFFICIAL socket 939 3000 OC results

nick1985

nick1985

Lifer
Epox 9NDA3+
Athlon64 3000
1Gig of G-skill PC-4400 with TCCD chips

Overclock:

295FSB with .10Vcore raise and .05chipset voltage raise.
2.8Mem voltage
Memory set at 200, or 1:1 ratio = 295 MHZ
2.5-4-4-10 (This memory is AMAZING, to say the least)

=2.65Ghz


Everest Memory Read Score

Everest Memory Write Score


Sandra CPU Arithmetic Score:
11571 MIPS
4323 MFLOPS
5632 MFLOPS

Sandra Memory Bandwidth Score:
7694 MB/s
7620 MB/s

**UPDATE**
2.7

Memory running 300mhz 1:1 ratio

🙂🙂
 
nick 1985 any results from prime 95 stress test yet . this board is showing some good o.cing .
I bought this board with all most the same set up except i will be useing ddr 3200 dual channel mushkin value ram.
On water. im looking to hit 260 fsb or better . nice OC
 
It has been known that a lot of Winchesters do not like Prime95 (some do not like P95 even at stock).
If it is stable in loops of 3DMark or other stability testers, then it is fine.
 
Originally posted by: nick1985
Epox 9NDA3+
Athlon64 3000
1Gig of G-skill PC-4400 with TCCD chips

Overclock:

295FSB with .10Vcore raise and .05chipset voltage raise.
2.8Mem voltage
Memory set at 200, or 1:1 ratio = 295 MHZ
2.5-4-4-10 (This memory is AMAZING, to say the least)

=2.65Ghz


Everest Memory Read Score

Everest Memory Write Score


Sandra CPU Arithmetic Score:
11571 MIPS
4323 MFLOPS
5632 MFLOPS

Sandra Memory Bandwidth Score:
7694 MB/s
7620 MB/s
Click to expand...


Are you 1T nick? Also are you using slots 3 and 4? I have similar board but J varity and ccan't run 1T there but I can run 1:1 same timmings. In fact same overclock.


Pretty nice to play FARCRY 16x12 everything ultra🙂

GT is 450/1200

You must be 1T scoring 10% higher on mem

write

read



CPUZ stuff
 
Originally posted by: Zebo
Originally posted by: nick1985
Epox 9NDA3+
Athlon64 3000
1Gig of G-skill PC-4400 with TCCD chips

Overclock:

295FSB with .10Vcore raise and .05chipset voltage raise.
2.8Mem voltage
Memory set at 200, or 1:1 ratio = 295 MHZ
2.5-4-4-10 (This memory is AMAZING, to say the least)

=2.65Ghz


Everest Memory Read Score

Everest Memory Write Score


Sandra CPU Arithmetic Score:
11571 MIPS
4323 MFLOPS
5632 MFLOPS

Sandra Memory Bandwidth Score:
7694 MB/s
7620 MB/s
Click to expand...


Are you 1T nick? Also are you using slots 3 and 4? I have similar board but J varity and ccan't run 1T there but I can run 1:1 same timmings. In fact same overclock.


Pretty nice to play FARCRY 16x12 everything ultra🙂

GT is 450/1200

You must be 1T scoring 10% higher on mem

write

read



CPUZ stuff
Click to expand...

yes i am 1T. but my RAM is in slots 1&2. does it make a difference between slots 1&2 Vs. 3&4?
 
99% of time slots 1 and 2 don't work even at default speed so most people use slot 3&4. What bios are you using?
 
Originally posted by: Zebo
99% of time slots 1 and 2 don't work even at default speed so most people use slot 3&4. What bios are you using?
Click to expand...

im not even sure, its the same one that came with the board when i got it a week or so ago.
 
I've got the same CPU as you and am seriously thinking about overclocking once I get my Motherboard in.

Just a quick n00b question though; what kind of equipment should I be looking at? I know water-cooling is one, but anything else? My RAM is OCZ PC3200 Enhanced Latency RAM. Will that do?

 
Originally posted by: nubreed000
I've got the same CPU as you and am seriously thinking about overclocking once I get my Motherboard in.

Just a quick n00b question though; what kind of equipment should I be looking at? I know water-cooling is one, but anything else? My RAM is OCZ PC3200 Enhanced Latency RAM. Will that do?
Click to expand...

there lots of other choices but they are not for the normal end user...

such as phase change, multi-stage cascade, dry ice, liquid nitrogen...

most normal users stick with air and water... i think that's a good start. 🙂
 
Originally posted by: nubreed000
I've got the same CPU as you and am seriously thinking about overclocking once I get my Motherboard in.

Just a quick n00b question though; what kind of equipment should I be looking at? I know water-cooling is one, but anything else? My RAM is OCZ PC3200 Enhanced Latency RAM. Will that do?
Click to expand...

Just use stock heat sink. These run so cool you don't need anything else for even 2600Mhz. What guys are doing is replacing POS 10x70mm fan on them with a real 80mm fan.
 
I'm considering this same bundle and I was wondering if the my SATA drives will work while OCd.
TIA.


Nice to see you rolling out some coin for this stuffs nick. I recall you playing with uber-cheap XPs. 😛
 
When I bought my C0 3000+ 2.7ghz on air was a dream :moon: Very nice OC, go on with your bad self Nick :beer:
 
Originally posted by: caboob
I'm considering this same bundle and I was wondering if the my SATA drives will work while OCd.
TIA.


Nice to see you rolling out some coin for this stuffs nick. I recall you playing with uber-cheap XPs. 😛
Click to expand...

i didnt roll out any coin...santa did 😛
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top