My OC is going pretty well

[adrunkgerbil]

E6300+ Asus P5B Deluxe and Scythe Infinity. In an Antec P180.

CPU Frequency: 415
Dram: 830
Pci-e: 100
pci: 33.33
spread spectrum: Disabled
memory voltage: 2.1 (stock)
CPU vcore voltage: Bios set at 1.45 (asus PC probe 2 and asus AI suite and CPU-Z read it at 1.38)
FSB Termination Voltage: 1.4
NB Vcore: 1.55
SB Vcore: 1.6
ICH Chipset Voltage Auto




I Haven't messed with my memory timings yet. It's 2 GB of Buffalo DDR2-800


And my CPU temps are ranging from 51-55, usually around 53. System temp is a steady 32

 

[Roguestar]

415Mhz is pretty slow for a CPU these days .

Try for 430FSB to break 3Ghz.

 

[adrunkgerbil]

Originally posted by: Roguestar
415Mhz is pretty slow for a CPU these days .

Try for 430FSB to break 3Ghz.

When should I start worrying about temps? I've been running Prime 95 for the past 40 min or so and everything is going well.

 

[brock01]

60-65C+ is alright on coretemp while on load
i wouldnt go much higher personally

 

[Duvie]

With a scyhte infinity and likley still default vcore...you have nothing to worry about.....get mildly concerned when you get into the 60's

 

[Ayah]

Get alarmed when you hit 70C+ load. Then you should be starting to worry.

 

[adrunkgerbil]

Alright, I'm at 3 GHZ and I left it on Prime95 for and hour and 25 minutes and it was fine. I stopped it and tried it again and within 10 min I got an error that said : "FATAL ERROR: rounding was 0.5, expected less than 0.4

 

[adrunkgerbil]

CPU-Z, Asus PC probe II and ASUS AI SUITE read the vcore at 1.4 v.


EDIT: now it's reading it at 1.38

 

[adrunkgerbil]

Current settings:

FSB: 430
Vcore: 1.45 (reading 1.38)
Memory: 4-4-4-12 @ 2.15v