My monitor is doing something really wierd...

[CtK]

I have a Mitsubishi Diamond Pro 930SB at 1024x768 resolution, everytime i start a new game and its default resolution is lower like 800x600 the screen gets all hourly glass(its curved on the sides)??
If i change the game resolution back up to 1024x768 its back to normal
why is it doing this??

Albatron 5900NU with latest forceware
running a dual monitor with a Dell 1800FP

any help will be greatly appreciated
thanks!!

 

[CtK]

bump

 

[VIAN]

Try recalling monitor to factory defaults in OSD.

If that doesn't fix it, then you will have to manually adjust the monitor settings to look how you want it to.

 

[CtK]

Originally posted by: VIAN
Try recalling monitor to factory defaults in OSD.

If that doesn't fix it, then you will have to manually adjust the monitor settings to look how you want it to.

thanks but in windows its fine at 1024x768
its just when it goes in2 games and the default is set at 800x600 its looks like an hour glass
but once i change it to 1024x768 its fine again

its wierd

 

[GalvanizedYankee]

Won't windows permit you to roll back to the older drivers for the 5900.

My 5200U acted squirrelly with the new drivers two months ago, so I rolled back and all is OK.
Its worth a try or reinstall the new drivers.

 

[anim8r]

Most monitors save settings per resolution *and* refresh rate and you'll need to adjust it for each mode that you use. Right now your 1024x768@XXMHz is setup properly and your 800x600@XXMHz is not. While it's in the mode that's messed up, adjust it and you'll be set from then on out. Note that some monitors have a "store" or "save settings" feature that enables the settings you've made to be saved while others save the settings for the given mode automatically. Your manual should cover this.

 

[CtK]

Originally posted by: galvanizedyankee
Won't windows permit you to roll back to the older drivers for the 5900.
My 5200U acted squirrelly with the new drivers two months ago, so I rolled back and all is OK.
Its worth a try or reinstall the new drivers.

ya ive uninstalled, used driver cleaner, installed newer drivers and it still does it

Originally posted by: anim8r
Most monitors save settings per resolution *and* refresh rate and you'll need to adjust it for each mode that you use. Right now your 1024x768@XXMHz is setup properly and your 800x600@XXMHz is not. While it's in the mode that's messed up, adjust it and you'll be set from then on out. Note that some monitors have a "store" or "save settings" feature that enables the settings you've made to be saved while others save the settings for the given mode automatically. Your manual should cover this.

hmmm ill try that once i get homes

thanks