I have a Memorex 52x24x52x that I bought in January. It has been working fine until about last week. It started hanging at about 11% burn on Nero and finally completing after like 15 minutes. As of yesterday, it doesn't finish burning. It either hangs there infinitely or it gives me an error:
Power Calibration Error.
The cd starts spinning and then stops , starts spining, then it stops..etc...
here are the notes from the error log from Nero.
Any help would be appreciated, thanks.
Javy
1502-4240-1125-0482-1088-XXXX*
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 6/25/2002 11:34:54 AM
Nero Version: 5.5.9.13
Recorder: <Memorex 52MAXX 2452AJ> Version: 6WS3 - HA 1 TA 1 - 5.5.9.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1621>Version: S1.5 - HA 1 TA 0 - 5.5.9.13
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-00AUA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1621 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Memorex 52MAXX 2452AJ atapi Port 1 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 743MB (761472kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
22.4.2003
CD Image
10:25:03 PM #1 Phase 90 File dlgbrnst.cpp, Line 1571
Buffer Underrun Protection activated
10:25:04 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
10:25:04 PM #3 Text 0 File Writer.cpp, Line 134
Writer Memorex 52MAXX 2452AJ running
10:25:04 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.
TINF:
10:25:04 PM #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media
10:25:04 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 666
Setup items (original item values)
0: TRM_DATA_MODE1 (ISO9660)
2 indices, index0 (150) not provided
original CD pos #0 + 184766 (184766) = #184766/41:3.41
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------
10:25:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 202
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 184765 (41:05.40)
10:25:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 207
Write in overburning mode: FALSE
10:25:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 1407
Recorder: Memorex 52MAXX 2452AJ;
CDRW code: 00 97 26 11; OSJ entry from: POSTECH Corporation
ATIP Data:
Special Info [hex] 1: D0 00 80, 2: 61 1A 0B (LI 97:26.11), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
10:25:04 PM #10 Text 0 File Burncd.cpp, Line 3988
Can only write at 40x instead of 52x to current disc
10:25:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 818
Prepare recorder Memorex 52MAXX 2452AJ for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 378707968
10:25:04 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 666
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (ISO9660)
2 indices, index0 (150) not provided
original CD pos #0 + 184766 (184766) = #184766/41:3.41
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 184766 blocks [Memorex 52MAXX 2452AJ ]
--------------------------------------------------------------
10:25:04 PM #13 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 40x (6,000 KB/s)
10:25:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0
10:25:04 PM #15 Text 0 File Mmc.cpp, Line 12517
StartDAO : CD-Text - Off
10:25:04 PM #16 Text 0 File Mmc.cpp, Line 17050
Set BUFE: supported -> ON , SMART-BURN : ON
10:25:04 PM #17 Text 0 File Mmc.cpp, Line 12775
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 29 05 29
10:31:58 PM #18 SCSI -1106 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02460000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
10:31:58 PM #19 MMC -1106 File Writer.cpp, Line 342
Power calibration error
10:31:58 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
10:31:58 PM #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
10:32:02 PM #22 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 40x (6,000 KB/s)
10:32:02 PM #23 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 2:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Window
s NT\CurrentVersion\WinLogon\All
ocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
P.S. I have read in other forums that the cause might be bad media, but I have tried 5 different types of cd-r's and cd-rw's and the problem is still there. I've also tried burning at less speed but stil nothing.
Power Calibration Error.
The cd starts spinning and then stops , starts spining, then it stops..etc...
here are the notes from the error log from Nero.
Any help would be appreciated, thanks.
Javy
1502-4240-1125-0482-1088-XXXX*
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 6/25/2002 11:34:54 AM
Nero Version: 5.5.9.13
Recorder: <Memorex 52MAXX 2452AJ> Version: 6WS3 - HA 1 TA 1 - 5.5.9.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD-ROM DDU1621>Version: S1.5 - HA 1 TA 0 - 5.5.9.13
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD400BB-00AUA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1621 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Memorex 52MAXX 2452AJ atapi Port 1 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048052kB)
Free physical memory: 743MB (761472kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
22.4.2003
CD Image
10:25:03 PM #1 Phase 90 File dlgbrnst.cpp, Line 1571
Buffer Underrun Protection activated
10:25:04 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
10:25:04 PM #3 Text 0 File Writer.cpp, Line 134
Writer Memorex 52MAXX 2452AJ running
10:25:04 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.
TINF:
10:25:04 PM #5 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media
10:25:04 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 666
Setup items (original item values)
0: TRM_DATA_MODE1 (ISO9660)
2 indices, index0 (150) not provided
original CD pos #0 + 184766 (184766) = #184766/41:3.41
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------
10:25:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 202
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 184765 (41:05.40)
10:25:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 207
Write in overburning mode: FALSE
10:25:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 1407
Recorder: Memorex 52MAXX 2452AJ;
CDRW code: 00 97 26 11; OSJ entry from: POSTECH Corporation
ATIP Data:
Special Info [hex] 1: D0 00 80, 2: 61 1A 0B (LI 97:26.11), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
10:25:04 PM #10 Text 0 File Burncd.cpp, Line 3988
Can only write at 40x instead of 52x to current disc
10:25:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 818
Prepare recorder Memorex 52MAXX 2452AJ for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 378707968
10:25:04 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 666
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (ISO9660)
2 indices, index0 (150) not provided
original CD pos #0 + 184766 (184766) = #184766/41:3.41
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 184766 blocks [Memorex 52MAXX 2452AJ ]
--------------------------------------------------------------
10:25:04 PM #13 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 40x (6,000 KB/s)
10:25:04 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0
10:25:04 PM #15 Text 0 File Mmc.cpp, Line 12517
StartDAO : CD-Text - Off
10:25:04 PM #16 Text 0 File Mmc.cpp, Line 17050
Set BUFE: supported -> ON , SMART-BURN : ON
10:25:04 PM #17 Text 0 File Mmc.cpp, Line 12775
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 29 05 29
10:31:58 PM #18 SCSI -1106 File Cdrdrv.cpp, Line 1415
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02460000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
10:31:58 PM #19 MMC -1106 File Writer.cpp, Line 342
Power calibration error
10:31:58 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
10:31:58 PM #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader
10:32:02 PM #22 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 40x (6,000 KB/s)
10:32:02 PM #23 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 2:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Window
s NT\CurrentVersion\WinLogon\All
ocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
P.S. I have read in other forums that the cause might be bad media, but I have tried 5 different types of cd-r's and cd-rw's and the problem is still there. I've also tried burning at less speed but stil nothing.
Facebook
Twitter