My BE6 500PIII wont boot after O/C

[Varborta]

I happen to fail to overclock the cpu and I think I turn the vcore too high and result a unbootable computer, there is nothing shows on the screen anymore and I cant do anything at all, it just wont post at all, pls tell me how do I reset the bios or anyother way to solve the problem?

 

[KR]

1. Remove the CPU

2. With the CPU removed, turn on power (you might get one beep)

3. Turn off the power

4. Reinstall the CPU

5. Turn on the power - your system should restore the CPU setting to the default and you can go from there.

Otherwise, unplug the system, move the CMOS jumper from the normal to the discharge position for 30 seconds, then return it to normal. Plg in the system and press the power button, things should be back to normal but your bios will be back to default and you may have to reinstall your devices.

 

[KR]

How high did you set the Vcore?

 

[Geto]

Alittle easier way to reset the bios, turn off the computer
hold the insert key, and turn it on. I hold it till I see
the ram check. I've done this on the BH6, BX6, BE6 and BE6.2.
Pretty standard on those mobo's. You should be able to
go into bios then.

 

[Varborta]

no, i still see nothing on the screen and the computer just halt function

 

[Varborta]

Thanks I got it it worked, drain power doesnt work.