• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Mushkin pc3500 not working in abit kv8max3

mrgoblin

Golden Member
Works for a bit and then problems. Swapped out for other memory and it works fine. Possible hardware conflicts? Tried each stick seperately and both are bad. Installed in slots 1-2. Could I have gotten 2 bad sticks? Can anyone else recommend another manufacturer(Besides buffalo)that will run 2-2-2 timings? Im on newegg and I cant seem to find any at pc 3200.

Specs are amd 64 3000+, antec 430w true,2 sticks 512mb pc3500 at stock speeds,1 seagate 80gb,zalman cpu cooler.
 
I just checked my timings. Try 2-3-3-6-11-16 (per CPU-z) The CPU may not like 2-2-2 on any memory. The 6 is cycle time (TRAS) anf the bank cycle time (TRC) and the 16 is DRAM idle timer. BTW mine is rock solid at 217 HTT, 2170 mhz. If I don't run graphics, I can run 220 HTT/2200. (I don't think the Radeon 9700 pro likes anything higher than 72)
 
I'm getting my A64 with the buffalo memory the one with the winbond chips that's on Asus's list of memory. I'll let you know how it goes when I get it.
Have you tried running it auto?


 
Bump the vdimm voltage to 2.75. Mushkin Level II RAM is VERY power hungry and will not run anywhere near it's advertised timings without a serious bump in voltage.
 
Back
Top