Multiple Site to Site VPN's from single location

[brockj]

I will do my best to describe the scenario, if anything needs to be made more clear, please let me know.

Currently we have a remote site running a 1711 with VPN software connecting to our Corporate office via Site to Site VPN tunnel. Now we are needing to add another Site to Site tunnel, for just one machine, to connect to another site (actually a customer). We have an extra Pix 501 available, and my thought was I could connect the pix to the 1711 and assign the pix one of the other public addresses we have available, create the tunnel from the pix to our customer, and have the needed PC on the inside of the pix.

I hope that makes sense. Ideally the 1711 would handle both tunnels and the traffic for the customer VPN would be limited to the single PC, and the rest of the traffic with the rest of the PC's would go through my VPN tunnel, but I don't think it can do that.

Any help is appreciated!

 

[drebo]

Being that it's just a single PC, you might want to use VPN client software.

PPTP might be the easiest to set up, but you could also try the Cisco VPN Client.

This setup is virtually identical to what you want: http://www.cisco.com/en/US/tec...09186a0080094685.shtml . At least, if my understanding of what you're trying to do is correct, anyway.

 

[brockj]

Unfortunately, customer requirements force us to needing a site to site (or lan to lan) VPN setup. I have not had a chance to work with the customer yet to see if this will work, but I am thinking it might.