MSI neo4 platinum won't recognize my raptor

[h3r2on]

I don't what i'm doing wrong but i have the neo4 platinum and i have 2 seagate 200gig's plugged into the nvraid controller and those show up fine. But no matter what sata socket I plug my 36GB raptor into neither raid controller recognizes it. I've tried different cables too.

I'm sure I have it set up right using the sata power contector have the jumper set to power management on. Am I forgetting something?

thanks in advance! 🙂

 

[Pr0d1gy]

Wierd, mine was instantly recognized on my MSI Neo4 Diamond?
That being said, I am having no luck installing Windows on it, but I think my problem is JEDEC latency RAM problems if anything.
Have you tried the Raptor in another system?

 

[h3r2on]

not yet i'm going to try it tonight on my asus a7n8x i'll post the results of that. any other ideas? dead drive maybe? i have a raptor in my other system maybe i'll try swapping them. thanks for the idea!

 

[imported_Kensai]

Hmm. Nothing wrong with Raptors in any of my builds with those boards. That's odd.

 

[h3r2on]

here's the full specs of the system if it helps:

MSI neo4 platinum w/ A64 3200+
MSI 6600GT
4x512 corsair pc3200
2x200GB seagate w/ NCQ plugged into nvraid
1 ailing raptor 36.7GB plugged into sil img
Antec NeoPower 480

 

[imported_Kensai]

That should work out. I really think it's that raptor of yours.

 

[h3r2on]

ok i'll check it out when i get off work, i have another raptor that's supposed to go in another machine i'll try that one and see. thanks for the help.

 

[h3r2on]

yep it was the drive i put it in my current setup and no go. RMA time. Put the other raptor in recognized right away! thanks for the help everybody🙂