I have a ram problem on this board. 2 things.
There are 4 sticks of corsair xms pc 3200 2x256 and 2x512
1. Im running the 180 multip at 230 fsb. for 207 2/3/3/6 (2t) timings. 2.7 volts. In CPUZ only shows 195 fsb. shows 207 during post and in bios.
2. In memory tests on pcmark and sandra I am running only 5gbs when it should be running closer to 6 gbs. This same board/ram on numerous review sites scores the 6gbs.
Ive ran the ram stable at 225 1:1 ratio for the 230 had to do the multi.
My bios version is 1.5. Also I cannot overclock past this amount. Its completley stable at 11 x 230 but wont even posts at 11 x 231. Its a san dieo 3700 chip.
ANY HELP ON ANY OF THESE PROBLEMS WOULD BE APPRECIATED.
Ive ran Memtest works fine, Ran super pi out to 32 m digits heat never got above 47c. Took about a halve hour.
There are 4 sticks of corsair xms pc 3200 2x256 and 2x512
1. Im running the 180 multip at 230 fsb. for 207 2/3/3/6 (2t) timings. 2.7 volts. In CPUZ only shows 195 fsb. shows 207 during post and in bios.
2. In memory tests on pcmark and sandra I am running only 5gbs when it should be running closer to 6 gbs. This same board/ram on numerous review sites scores the 6gbs.
Ive ran the ram stable at 225 1:1 ratio for the 230 had to do the multi.
My bios version is 1.5. Also I cannot overclock past this amount. Its completley stable at 11 x 230 but wont even posts at 11 x 231. Its a san dieo 3700 chip.
ANY HELP ON ANY OF THESE PROBLEMS WOULD BE APPRECIATED.
Ive ran Memtest works fine, Ran super pi out to 32 m digits heat never got above 47c. Took about a halve hour.
