• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

MSI KT3 Ultra2 floppy drive problems...help please!

D

DLzone

Member
I just recently put together an athlon rig, but when all was finished the floppy drive always had the access light on and would not read any disks. Figuring that it was just the floppy drive I ordered another. Floppy drive came in and exact same problem!! Does anyone have any ideas as to what the problem is? Any questions/comments would be very appreciated.
 
Ok, I'll try a different cable,(that means going on a little trip) and will come back and see if that helps. Hopefully it will!
 
did a new floppy cable fix it?

I have the sme problem with the same board...hummm

Also, my cd rom thats a sec slave to a CDRW is not reading cds. W2k OS.
 
I have that Mobo and no pb with the floppy drive.

I agree with above. The most common problem is to plug the cable right. usually, on the floppy drive end, it is my experience that the red line should be on the left, or towardsthe inside. It is easier on the motherboard end, because there is a little hole in the middle of the connector.

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top