Below is the layout of the "JAUD1"
PIN SIGNAL DESCRIPTION
1 PORT 1L Analog Port 1 - Left channel
2 GND Ground
3 PORT 1R Analog Port 1 - Right channel
4 PRESENCE# Active low signal - signals BIOS that a High Definition Audio
dongle is connected to the analog header. PRESENCE# = 0
when a High Definition Audio dongle is connected.
5 PORT 2R Analog Port 2 - Right channel
6 SENSE1_RETIRN Jack detection return from front panel JACK1
7 SENSE_SEND Jack detection sense line from the High Definition Audio CODEC
jack detection resistor network
8 KEY Connector Key (no pin)
9 PORT 2L Analog Port 2 - Left channel
10 SENSE2_RETIRN Jack detection return from front panel JACK2
This is what i have to work with
2 Grounds (black)
1 Mic-in (yellow)
1 Mic-power (red)
1 L-Ret (brown)
1 R-Ret (grey)
1 L-Out (blue)
1 R-Out (Green)
could anyone please help me and try and pair up the MSI Pin Definition with what i have to work with if possible.
it would be greatly appreciated.
PIN SIGNAL DESCRIPTION
1 PORT 1L Analog Port 1 - Left channel
2 GND Ground
3 PORT 1R Analog Port 1 - Right channel
4 PRESENCE# Active low signal - signals BIOS that a High Definition Audio
dongle is connected to the analog header. PRESENCE# = 0
when a High Definition Audio dongle is connected.
5 PORT 2R Analog Port 2 - Right channel
6 SENSE1_RETIRN Jack detection return from front panel JACK1
7 SENSE_SEND Jack detection sense line from the High Definition Audio CODEC
jack detection resistor network
8 KEY Connector Key (no pin)
9 PORT 2L Analog Port 2 - Left channel
10 SENSE2_RETIRN Jack detection return from front panel JACK2
This is what i have to work with
2 Grounds (black)
1 Mic-in (yellow)
1 Mic-power (red)
1 L-Ret (brown)
1 R-Ret (grey)
1 L-Out (blue)
1 R-Out (Green)
could anyone please help me and try and pair up the MSI Pin Definition with what i have to work with if possible.
it would be greatly appreciated.
Facebook
Twitter