MSI K7T turbo 2/ 1 ghz duron <morgan> question

[karbon4]

it's currently clocked @ fsb 110 x 10 = 1100.. and the core voltage <according to Sandra> is 1.81v.

I can't seem to get the FSB to start @ 133. to be able to get to 133 requires a jumper removal, and when i do that, it just doesn't boot.

I think it has something to do with the clock multiplier staying @ 10 rather than movin to 7.5. does anybody have any idea how i can get the board to run @ 133 rather than 100.

 

[NesuD]

with that board unless you have a chip that can handle the overclock you most likely aren't going to get it to boot at 133. Your right the problem is the multiplier being locked to 10. Even if you unlock the chip and use the overclockers bios which allows the lower multipliers. At boot the board initially trys to run at the default multiplier of 10 momentarily until it can step itself down so unless the chip can handle 1.33 gig it isn't going to boot with that board.

 

[Poof]

I have the same board and have been trying to get mine to boot at 133 with a 266 T-bird that I temporarily swapped in there. I remember alot of threads last year about doing this, but forgot all the details...