MSI K7T Pro2 Problems

[BatmanNate]

I have an MSI K7T Pro2 mainboard in my living room PC with a Duron 800. It normally runs idle just cracking seti for the team unless we are in there watching a movie on it, however I came home from work today and it was locked solid. No picture, all lights (lncluding the HD) were on solid. I cracked her open, swapped vid card, checked all the peripherals and the memory, and wiped the bios. However when I turn on the PC, I get no video signal and I have no other CPU to test in this board. It does indicate an LED code on the board itself, but the manual on MSI's site is an .exe that won't run on my platform. Can anyone tell me what red-green-green-red signifies? Thanks in advance.

 

[Mem]

On my original MSI K7T Pro, RED,GREEN,GREEN,RED (0-1-1-0) in code book means "processor initialization".Hope this helps.

 

[Cerb]

In addition, the original Pro2s would die and give the RGGR on the DLED. In fact...
Why K7T Pro2As died

 

[BatmanNate]

Thanks for the insight guys. I probably have a dead board. Too bad Compgeeks doesn't still have that Socket A board that took SDRAM and has onboard 160 SCSI for $39.