MSI K7T Pro2-A Bios

[Drexel]

I recently flashed the bios to the beta one with the wider range of vcore settings, but it seems it took away my DRAM timing settings in Advanced Chipset Features. Has anyone come across this problem also? And if so do you know how to fix it? Thanks in advance...

 

[toph99]

same thing happened to me. the only way that i have found to fix it(which i have yet to try) is to pencil in the L7 bridges to make the default voltage 1.85.

 

[Niard]

When I flashed that Bios I lost a few of my mutplier settings, the only ones available to me now are Default, 11,11.5,12, &12.5

Now I'm running an AMD1000mhz so I think that the Default setting should be 10.
I'm thinking about flashing the 2.2 version to see if I can recover my missing settings.
I did notice in the Advanced chip settings that the top setting called "set dram by spd"
was set to YES then my DRAM settings were set to AUTO and I could not change them till I set it to NO.
Then my latency and Dram settings were available to set.
The scariest part of this Bios flash is when loading it says ?Unknown Flash? when I saw that I did wonder what the heck I had done at least until it finished loading ;-)
Niard