Modify HP P2035n to accept 05x cartridge?

[Kenazo]

HP makes a ce505x cartridge that is designed to only fit in their P2055 printers. We have a P2035n which apparently can't use the ce505x.

Both printers use the same ce505a cartridge, but the 2035n has little plastic tabs that physically prevent you from using the 05x cartridge. Does anyone know if it's possible to modify the 2035n to take the x cartridge?

 

[joao007]

Same problem here looks like 05X CE505X does not fit the hp p2035, but see : http://h20195.www2.hp.com/v2/default.aspx?cc=pt&lc=pt&oid=3662025

Toner Cartridge: CE505A/CE505X

DECLARATION OF CONFORMITY​

according to ISO/IEC 17050-1 and EN 17050-1​

Manufacturer's Name:​

​

​

​

​

Hewlett-Packard Information Technology
R&D (Shanghai) Co., Ltd.
DoC#: BOISB-0801-00-rel.6.0​

Manufacturer's Address:​

​

​

​

​

Building 6, No. 690 BiBo Road, ZhangJiang, Shanghai, PRC​

declares, that the product​

Product Name:​

​

​

​

​

HP LaserJet P2035 series and P2055 series​

Regulatory Model Number​

​

​

​

​

BOISB-0801-00​

Product Options:​

​

​

​

​

All​

Toner Cartridge:​

​

​

​

​

CE505A/CE505X​

conforms to the following Product Specifications:​

SAFETY:​

​

​

​

​

IEC 60950-1:2005 / EN60950-1: 2006 +A11:2009
IEC 60825-1:2007 / EN 60825-1:2007 (Class 1 Laser/LED Product)
IEC 62311:2007 / EN62311:2008
GB4943-2001​

EMC:​

​

​

​

​

CISPR 22:2005 / EN 55022:2006 -- Class B1)​

EN 61000-3-2:2006
EN 61000-3-3:1995 +A1 +A2
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B​

​

​

​

2) / ICES-003, Issue 4
GB9254-2008, GB17625.1-2003​

Energy Use​

​

​

​

: ​

Regulation (EC) No. 1275/2008​

ENERGY STAR® Qualified Imaging Equipment Typical Electricity Consumption (TEC) Test Procedure​

Supplementary Information:​

The product herewith complies with the requirements of the EMC Directive 2004/108/EC and the Low Voltage Directive
2006/95/EC, the EuP Directive 2005/32/EC, and carries the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation​

_______________________
Shanghai, PRC Hewlett-Packard Information Technology R&D (Shanghai) Co., Ltd.
January 6, 2011 by: Kevin Yao
Product Regulations Manager​

For Regulatory Topics only, contact:​

European Contact:​

​

​

​

Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh,
Department HQ-TRE / Standards Europe, Herrenberger Straße 140, D-71034 Böblingen (FAX: +49-7031-14-3143)​

www.hp.eu/certificates​

USA Contact: Product Regulations Manager, Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 1-650-857-1501

 

[rodnuts]

I finally did it, and thankfully it worked!

I have been waiting for the warranty to expire.

You need to cut/melt out the inside of the toner door.

You need to cut/melt off the extra 2 tabs on the 05X toner.

I switched the chip with the 05A (don't know if this is required yet)

 

[Asplode]

Did you do all of that with a saw (seems unlikely), soldering iron (likely really messy), hot metal wire (too close to johnny mnemonic?) ... that's a lot of plastic in the way!

Glad to know it works, have you had to do it again to another cartridge?

 

[mimo2002]

I know it is old But I just bought new P2035 printer and want to know your feedback about the 05x life.
does the 05x last as it on P2055 printer?
how can I remove the cartridge door to cut ?