I thought I would see if anyone has run into this before. I bought a Creative/Digicom DI3635 winmodem and am having very slow downloads with it. It connects in the 49 to 50Kbs range consistently but the download speed seems to be in the 1 to 2 Kbs range.
The two things that got my attention in the modem log is the no error control or data compression.
Installation, downloaded the latest drivers from DSI and used those, I did not use the installation CD at all.
The comm driver is comm.drv 4/23/1999
The use error control and compress data check boxes are checked under advanced properties as is use flow control and hardware.
The old modem's drivers were uninstalled and on reboot the new modem was detected and the new drivers installed.
W98SE,BH-6,550 celeron, 256 memory
creative driver site
Any ideas?
Modem log
01-15-2001 19:41:30.77 - DSI D-F-V V.90 DI3635 in use.
01-15-2001 19:41:30.77 - Modem type: DSI D-F-V V.90 DI3635
01-15-2001 19:41:30.77 - Modem inf path: MDMV90.INF
01-15-2001 19:41:30.77 - Modem inf section: Modem2
01-15-2001 19:41:31.08 - 115200,N,8,1
01-15-2001 19:41:31.08 - 115200,N,8,1
01-15-2001 19:41:31.08 - Initializing modem.
01-15-2001 19:41:31.08 - Send: AT<cr>
01-15-2001 19:41:31.13 - Recv: AT<cr>
01-15-2001 19:41:31.13 - Recv: <cr><lf>OK<cr><lf>
01-15-2001 19:41:31.13 - Interpreted response: Ok
01-15-2001 19:41:31.13 - Send: AT &F E0 S0=0 E1 V1 &D2 &C1 W2 S95=0<cr>
01-15-2001 19:41:31.17 - Recv: AT &F E0 S0=0 E1 V1 &D2 &C1 W2 S95=0<cr>
01-15-2001 19:41:31.61 - Recv: <cr><lf>OK<cr><lf>
01-15-2001 19:41:31.61 - Interpreted response: Ok
01-15-2001 19:41:31.61 - Send: ATS7=60M0\N3%C3&K3X4<cr>
01-15-2001 19:41:31.65 - Recv: ATS7=60M0\N3%C3&K3X4<cr>
01-15-2001 19:41:31.92 - Recv: <cr><lf>OK<cr><lf>
01-15-2001 19:41:31.92 - Interpreted response: Ok
01-15-2001 19:41:31.92 - Dialing.
01-15-2001 19:41:31.92 - Send: ATDT#######<cr>
01-15-2001 19:41:31.97 - Recv: ATDT3361444<cr>
01-15-2001 19:41:57.32 - Recv: <cr><lf>CONNECT 50666<cr><lf>
01-15-2001 19:41:57.32 - Interpreted response: Connect
01-15-2001 19:41:57.32 - Connection established at 50666bps.
01-15-2001 19:41:57.32 - Error-control off or unknown.
01-15-2001 19:41:57.32 - Data compression off or unknown.
IRQs
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 (free)
4 (free)
5 Diamond Viper V770/Viper V770 Ultra
5 IRQ Holder for PCI Steering
6 Standard Floppy Disk Controller
7 Printer Port (LPT1)
8 System CMOS/real time clock
9 Creative SB16 Emulation
10 Creative SB Live!
10 IRQ Holder for PCI Steering
11 DSI D-F-V V.90 DI3635
11 DSI Modem Device Manager
11 Intel(r) 82371AB/EB/MB PCI to USB Universal Host Controller
11 IRQ Holder for PCI Steering
12 PS/2 Compatible Mouse Port
13 Numeric data processor
14 Primary IDE controller (dual fifo)
14 Intel 82371AB/EB PCI Bus Master IDE Controller
15 Secondary IDE controller (dual fifo)
15 Intel 82371AB/EB PCI Bus Master IDE Controller
The two things that got my attention in the modem log is the no error control or data compression.
Installation, downloaded the latest drivers from DSI and used those, I did not use the installation CD at all.
The comm driver is comm.drv 4/23/1999
The use error control and compress data check boxes are checked under advanced properties as is use flow control and hardware.
The old modem's drivers were uninstalled and on reboot the new modem was detected and the new drivers installed.
W98SE,BH-6,550 celeron, 256 memory
creative driver site
Any ideas?
Modem log
01-15-2001 19:41:30.77 - DSI D-F-V V.90 DI3635 in use.
01-15-2001 19:41:30.77 - Modem type: DSI D-F-V V.90 DI3635
01-15-2001 19:41:30.77 - Modem inf path: MDMV90.INF
01-15-2001 19:41:30.77 - Modem inf section: Modem2
01-15-2001 19:41:31.08 - 115200,N,8,1
01-15-2001 19:41:31.08 - 115200,N,8,1
01-15-2001 19:41:31.08 - Initializing modem.
01-15-2001 19:41:31.08 - Send: AT<cr>
01-15-2001 19:41:31.13 - Recv: AT<cr>
01-15-2001 19:41:31.13 - Recv: <cr><lf>OK<cr><lf>
01-15-2001 19:41:31.13 - Interpreted response: Ok
01-15-2001 19:41:31.13 - Send: AT &F E0 S0=0 E1 V1 &D2 &C1 W2 S95=0<cr>
01-15-2001 19:41:31.17 - Recv: AT &F E0 S0=0 E1 V1 &D2 &C1 W2 S95=0<cr>
01-15-2001 19:41:31.61 - Recv: <cr><lf>OK<cr><lf>
01-15-2001 19:41:31.61 - Interpreted response: Ok
01-15-2001 19:41:31.61 - Send: ATS7=60M0\N3%C3&K3X4<cr>
01-15-2001 19:41:31.65 - Recv: ATS7=60M0\N3%C3&K3X4<cr>
01-15-2001 19:41:31.92 - Recv: <cr><lf>OK<cr><lf>
01-15-2001 19:41:31.92 - Interpreted response: Ok
01-15-2001 19:41:31.92 - Dialing.
01-15-2001 19:41:31.92 - Send: ATDT#######<cr>
01-15-2001 19:41:31.97 - Recv: ATDT3361444<cr>
01-15-2001 19:41:57.32 - Recv: <cr><lf>CONNECT 50666<cr><lf>
01-15-2001 19:41:57.32 - Interpreted response: Connect
01-15-2001 19:41:57.32 - Connection established at 50666bps.
01-15-2001 19:41:57.32 - Error-control off or unknown.
01-15-2001 19:41:57.32 - Data compression off or unknown.
IRQs
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 (free)
4 (free)
5 Diamond Viper V770/Viper V770 Ultra
5 IRQ Holder for PCI Steering
6 Standard Floppy Disk Controller
7 Printer Port (LPT1)
8 System CMOS/real time clock
9 Creative SB16 Emulation
10 Creative SB Live!
10 IRQ Holder for PCI Steering
11 DSI D-F-V V.90 DI3635
11 DSI Modem Device Manager
11 Intel(r) 82371AB/EB/MB PCI to USB Universal Host Controller
11 IRQ Holder for PCI Steering
12 PS/2 Compatible Mouse Port
13 Numeric data processor
14 Primary IDE controller (dual fifo)
14 Intel 82371AB/EB PCI Bus Master IDE Controller
15 Secondary IDE controller (dual fifo)
15 Intel 82371AB/EB PCI Bus Master IDE Controller
Facebook
Twitter