I've been stuck @200 on my ram for a while 2-2-2-6 (I can get to about 206 without errors) so I thought loosen up everything and see if I can go to higher dividers
with my tight 200 settings i get 2824mb/s bandwith from memtest
everest write: 5876
everest read: 2774 sometimes and sometimes around 2400, crystal mark shows 2400ish as well
everest latency: 38.6
superpi2M: around 1:14.8-1:15.2
superpi32M: 29:54
loosening everything but keeping 2-2-2-6-1T-bank interleave enabled I get memtest 2425mb/s bandwith
so then i raised the divider so the memory is at 216, passes (it failed for me before)
memtest bandwith 2606mb/s
everest write: 6134
everest read: 2561
everest latency 40.6
superpi2M: 1:16.6
I'll benchmark 32M next
But still everest and other benchmarks are telling me one thing while superpi and memtest are telling me another
with my tight 200 settings i get 2824mb/s bandwith from memtest
everest write: 5876
everest read: 2774 sometimes and sometimes around 2400, crystal mark shows 2400ish as well
everest latency: 38.6
superpi2M: around 1:14.8-1:15.2
superpi32M: 29:54
loosening everything but keeping 2-2-2-6-1T-bank interleave enabled I get memtest 2425mb/s bandwith
so then i raised the divider so the memory is at 216, passes (it failed for me before)
memtest bandwith 2606mb/s
everest write: 6134
everest read: 2561
everest latency 40.6
superpi2M: 1:16.6
I'll benchmark 32M next
But still everest and other benchmarks are telling me one thing while superpi and memtest are telling me another
