Memory timmings gurus

[malvare1]

OCZ CREW:
I have the expert board and just got my new gx xtc pc 4000 2x1 gig ram.

Could you give me timmings for 280 fsb this are my options on the board :

Genie BIOS Settings:

FSB Bus Frequency -
LDT/FSB Frequency Ratio -
CPU/FSB Frequency Ratio -
PCI eXpress Frequency -
CPU VID StartUp Value -

CPU VID Control -
CPU VID Special Control -
LDT Voltage Control -
Chip Set Voltage Control -
DRAM Voltage Control -

DRAM Configuration Settings:

DRAM Frequency Set -
Command Per Clock (CPC) -
CAS Latency Control (Tcl) -
RAS# to CAS# delay (Trcd) -
Min RAS# active time (Tras) -
Row precharge time (Trp) -
Row Cycle time (Trc) -
Row refresh cyc time (Trfc) -
Row to Row delay (Trrd) -
Write recovery time (Twr) -
Write to Read delay (Twtr) -
Read to Write delay (Trwt) -
Refresh Period (Tref) -
Write CAS Latency (Twcl) -
DRAM Bank Interleave -

DQS Skew Control -
DQS Skew Value - 0
DRAM Drive Strength -
DRAM Data Drive Strength -
Max Async Latency -
DRAM Response Time -
Read Preamble Time -
IdleCycle Limit -
Dynamic Counter -
R/W Queue Bypass -
Bypass Max -
32 Byte Granularity -

any help would be appreciated
Thanks

 

[letdown427]

You'll definately want to go to dfi-street for that kind of detail timings wise. Or so it appears anyway. You probably already know about it, but thought I'd say just in case.