Memory timings for OCZ PC3200

[siroc1]

Hello all,

I'm new to the forum and fairly new to OC'ing. I'll give you my system specs and what I've done so far to see if anyone can offer a good set of memory timings.

DFI Lanparty UT NF4 SLI Expert - BIOS 4/06

Opteron 170 2.0Mhz

4GB OCZ PC3200 Platinum - 4 1028 sticks

Vista64

OC'ing

FSB - 300
LTD/FSB - X3
CPU/FSB- X10
CPU VID - 1.425V
CPU VID Control - 1.350
Above Vid * 109.6%

Can someone tell me how can I set up memory timings for my memory to run at at least 350 or above. I don't necessarily want to OC the memory but want to get as close to the specified speed of 400 as I can. Thank you

 

[Billb2]

I assume you know how to use multipliers and dividers:
Try 3,3,3,8, 1T and start cranking the memory voltage.
With 4 sticks you'll have to be lucky to get back to 400.

 

[siroc1]

thanks man. I'll try this, but no to answer your assumption I'm not quite sure how to use the multipliers and dividers. That's where I'm having a hard time. If I don't get to 400 that's fine but at least 350+ will do. I'm not really overclocking the memory anyways with those numbers. Mainly the CPU. Thanks if you can help me some more I'll appreciate it.