memory timing/ which board is better for o/c

[topdog]

upgraded to a 2.6@3093 p4 on a p4s333, timing is 2-2-2-7 1.65v 119fsb. problem is trying to run torture test(prime). cpu/mem 3:5
can someone give me some insight.
Thanks

 

[Mikki]

If you're getting errors, you need to either lower your fsb (best option) or raise the v-core. You could also try running your timings at 2-3-2-7 and see if that helps. hth 🙂

 

[topdog]

have her runnin stable 2.6@2860 cpu/mem 3:5 110fsb 1.6v

just recieved P4b533 do you think i'll get a better o/c with this board or thats all this chip will do

 

[THUGSROOK]

p4b533 should do better ~ or it is the chips limit (on 1.6v)

 

[topdog]

raising the core did'nt help stability, was tryin for 3.0+
the quest continues

 

[topdog]

installing p4b533 sweet board loading windows now.

 

[Ketchup]

Did you read the article over at overclockers about the c1's crashing while running prime? It seems that these chips will crash while running prime when in fact they are perfectly stable for ANYTHING ELSE. I say if it is stable for everything else, I wouldn't worry about prime. I have never run prime, and haven't had a single stability issue with my 2.4B at 2.9.