Memory test errors with CUSL2

[HemiDart]

Norton Systemworks 2001 gives memory errors when I test the system memory with 2 sticks of PC133 double sided ram. With only 1 stick of ram installed, (either one in any slot), the test is passed. There is no other evidence of memory problems other than this test. I know the CUSL2 has issues with memory running at 133Mhz, but my memory is running at 100 Mhz. Any suggestions as to what is wrong. My system specs. are:

Windows ME
CUSL2 bios 1002 final
600 MHz celeron not overclocked
128 Megs double sided generic CAS3 sdram in slot one
256 Megs double sided Micron CAS3 sdram in slot two
Hercules Geforce 2 MX
Soundblaster Live X gamer
30.7 GB Maxtor ATA100 7200rpm hard disk
Asus 50x CD ROM
Plextor 8432Ti burner

Thanks for your help.

 

[rexfalk]

The CUSL2 is picky about RAM and I have read about problems using two double sided sticks in this board that went away by going to either two single sided sticks or one 256k double sided.
If I remember right, the specs on all 815 boards call for no more than 3 sides to the memory, either 3 single sided, one single and one double, etc. Some get away with 4 sides, some don't.
Read more at www.cusl2.com in their memory forum.

Rex