Memory setting question about DFI LP 250GB

[Ketchup]

Maybe I am missing it, but how do you get the DFI Lanparty 250GB to change to 2T memory timings? I cannot find it in the dram menu, and my memory defaults to 1T (which wouldn't be a bad thing if I wasn't overclocking.

 

[rpv]

it is the second command in the DRAM menu-Command per clock(CPC): 3 options-Auto, Enable(1T), Disable(2T).

I have the exact same processor and mobo-waiting for my PSU to arrive to OC it well. Is ur setup prime and memtest stable...If so can u let me know what the voltages are and ur memory timings..I have the same HSF too..Thanx.

 

[Ketchup]

Thanks for the help.

Not sure about prime and memtest as I don't run them. PC has been running for 24 hours at this setting without a hickup. I have been playing games and running benchmarks without a crash. CPU is at 260x10 and reads 1.6 vcore in Smart Guardian and 1.64 in the bios. Memory is set to 2.8. I am using 5:6 until I can get some TCCD memory since this Kingston will only do about 230 at 3-3-3-10 1T, but some more voltage may help. I haven't had much time to play with it yet. Just happy to be rid of my Epox.

Good luck with your overclock.