Nocturnal
Lifer
I have an A8N32-SLI Deluxe with recent BIOS and an 3800 X2 Manchester with 2GB Crucial Ballistix Tracer.
Anyhow I've been having blue screens lately and I finally got around to testing the system using Orthos Beta by Johnny and soon realized that at stock settings, including CPU and memory that I had errors. I realized then that perhaps there is something wrong with my memory.
I ran Memtest on my computer for 24 hours and there were no errors reported.
I went ahead and overclocked my system by changing the FSB to 210 and leaving the multi at 10. As soon as I started the Orthos program not even a few seconds in I got an error.
I tried with one stick in instead of both. Each stick could go through with the system overclocked to 210x10 with no errors for around 5 minutes.
I immediately put the sticks back in and tried Orthos again and again it failed within a few seconds.
I went back into BIOS and upped the DDR voltage to 2.75 for my Ballistix sticks and now I am error free in Orthos.
Should I have to up the voltage to 2.75 (I know Ballistix is rated to run at 2.8)? Shouldn't auto be fine or no? Are some memory sticks/brands picky about this particular setting?
UPDATE: Even at 2.75 it error within Orthos again. I put it back to stock everything except for the 2.75 DDR voltage. I'm about to try again. I'll report back.
UPDATE: Okay even at stock speeds with both DIMMs installed it errors. Does anyone think I can safely conclude that my memory is at fault? The thing is, if I put in one or the other and run the tests they don't error. Is that indicative of the motherboard possibly being bad? I won't know until tonight when I can take my box home to test out other things. This sucks.
Anyhow I've been having blue screens lately and I finally got around to testing the system using Orthos Beta by Johnny and soon realized that at stock settings, including CPU and memory that I had errors. I realized then that perhaps there is something wrong with my memory.
I ran Memtest on my computer for 24 hours and there were no errors reported.
I went ahead and overclocked my system by changing the FSB to 210 and leaving the multi at 10. As soon as I started the Orthos program not even a few seconds in I got an error.
I tried with one stick in instead of both. Each stick could go through with the system overclocked to 210x10 with no errors for around 5 minutes.
I immediately put the sticks back in and tried Orthos again and again it failed within a few seconds.
I went back into BIOS and upped the DDR voltage to 2.75 for my Ballistix sticks and now I am error free in Orthos.
Should I have to up the voltage to 2.75 (I know Ballistix is rated to run at 2.8)? Shouldn't auto be fine or no? Are some memory sticks/brands picky about this particular setting?
UPDATE: Even at 2.75 it error within Orthos again. I put it back to stock everything except for the 2.75 DDR voltage. I'm about to try again. I'll report back.
UPDATE: Okay even at stock speeds with both DIMMs installed it errors. Does anyone think I can safely conclude that my memory is at fault? The thing is, if I put in one or the other and run the tests they don't error. Is that indicative of the motherboard possibly being bad? I won't know until tonight when I can take my box home to test out other things. This sucks.
