Another thing while people are helping me..
The ThermalTake Xaser III v2000 has a lcd screen that shows temp etc...
Now I got the sensor under the CPU like it staed and stuck with the sticky tape surpplyed with the case but the LCD rads LLL?!?! Why is it not working.
While I got the numbers I also chcked the sensor and stuck it down a bit more yet it still not reads.
WTF????
Also is there any place I can buy something like power adapotor plugs?!?!
To have more things plugged in, I ran out of plugs to power the front LED so I need extensions, can this be done? and where can I buy them, from?!?!?
Also the case has a CASE OPEN lead I plugged it correctly on the pin and when case is open there is no alarm (should there be an alarm?) nothing happens?!?! Whats it do? The switch it leads is at ack where case closes.
Also I dont find this case cools much with the 7 fans!!!
According to my bios its 41C!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Sorry for so many things at once but i need to try fix them as well before ocing.. dam and i wanted to OC tonight
Also you know the WIRE SLEEVES the plastic things you roll around cables... where can I buy some of them from?
Or best to put it "where can I buy items that help me organize and keep my wires tidy from please?" (UK sites)
Another thing is on top of the case is 2 USB 2.0 and headphone mic sockets, I tried p,ugging these in the way my MB manual and case manual say but they are named diffrently and did not work, if I had the USB plugged in my ps2 keybored and my mice USB in the back would not work... so I taken the 2 top ojnes out what should I do??
Ok another thing is I was in another forum earlier today and I mentioned my ram is 333mhz 2700 DDR Crucal 512mb..
Now someone said I over clocking my PC setting SDram to 333 in bios and not to 266..?!?
But I am not as my cpu fsb is 133 and my ram is 333mhz it can run at that and I set it to it?
So why would someone say its over clocked and that I should have my ram at 133... if I have my ram at 133 it aint runnig half as it can?!?!
Someone explain please?
Also I read in a magainze that pc2700 only runs at 266 bit ?????? up unless they was wrong.
Anyway I saw on thse forums that people have problems that WPCUID is showing 266 ram when they set it to 333 like me..
I thought I go check my WPCUID and it turned out it says 266 and not 333..?!?!??!
I got it set to 333mhz ram in my bios so why is WPCUID shiowing it as 333?
Maybe this is why sometimes I feel as if my pc dont run as half as good as I thought?!?!
How do I get my ram running to what it should do... the bset etc.
Kind regards warren
Look forward to replys hopefully get alot of trhe above asorted.
Kind Regards
WARREN!
The ThermalTake Xaser III v2000 has a lcd screen that shows temp etc...
Now I got the sensor under the CPU like it staed and stuck with the sticky tape surpplyed with the case but the LCD rads LLL?!?! Why is it not working.
While I got the numbers I also chcked the sensor and stuck it down a bit more yet it still not reads.
WTF????
Also is there any place I can buy something like power adapotor plugs?!?!
To have more things plugged in, I ran out of plugs to power the front LED so I need extensions, can this be done? and where can I buy them, from?!?!?
Also the case has a CASE OPEN lead I plugged it correctly on the pin and when case is open there is no alarm (should there be an alarm?) nothing happens?!?! Whats it do? The switch it leads is at ack where case closes.
Also I dont find this case cools much with the 7 fans!!!
According to my bios its 41C!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Sorry for so many things at once but i need to try fix them as well before ocing.. dam and i wanted to OC tonight
Also you know the WIRE SLEEVES the plastic things you roll around cables... where can I buy some of them from?
Or best to put it "where can I buy items that help me organize and keep my wires tidy from please?" (UK sites)
Another thing is on top of the case is 2 USB 2.0 and headphone mic sockets, I tried p,ugging these in the way my MB manual and case manual say but they are named diffrently and did not work, if I had the USB plugged in my ps2 keybored and my mice USB in the back would not work... so I taken the 2 top ojnes out what should I do??
Ok another thing is I was in another forum earlier today and I mentioned my ram is 333mhz 2700 DDR Crucal 512mb..
Now someone said I over clocking my PC setting SDram to 333 in bios and not to 266..?!?
But I am not as my cpu fsb is 133 and my ram is 333mhz it can run at that and I set it to it?
So why would someone say its over clocked and that I should have my ram at 133... if I have my ram at 133 it aint runnig half as it can?!?!
Someone explain please?
Also I read in a magainze that pc2700 only runs at 266 bit ?????? up unless they was wrong.
Anyway I saw on thse forums that people have problems that WPCUID is showing 266 ram when they set it to 333 like me..
I thought I go check my WPCUID and it turned out it says 266 and not 333..?!?!??!
I got it set to 333mhz ram in my bios so why is WPCUID shiowing it as 333?
Maybe this is why sometimes I feel as if my pc dont run as half as good as I thought?!?!
How do I get my ram running to what it should do... the bset etc.
Kind regards warren
Look forward to replys hopefully get alot of trhe above asorted.
Kind Regards
WARREN!
Facebook
Twitter